Hi everyone,
I'm a new member.
Re 1988 FZR400 1WG: While removing the clutch basket to see what was going on, ( push rod would not disengage , the rod and ball bearing looked worn ) i managed to break one of the mounting posts that holds one of the springs, off the clutch basket. ( part # 1WG16371-01, Boss , Clutch) . Don't ask. I was rushing and messed it up.
Will a 1992 3TJ clutch basket fit as a replacement? at the moment i can find a 1992 3TJ complete clutch to drop in. But i can't find a 1988 clutch basket 1WG. I'm trying to get it fixed before the next race round.
2. Alternatively, i should take the opportunity to upgrade the clutch - with a slipper clutch and/or barnett SRK kit?.
Looking for feedback. Any info would greatly be appreciated.
Thanks.
Clutch - FZR400 - Will 1992 3tJ clutch basket fit my 1WG?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
rddmm2
- One Hit Wonder
- Posts: 1
- Joined: Mon Aug 23, 2021 5:56 am
-
kagari15
- Settled in member
- Posts: 42
- Joined: Sun Jun 14, 2020 4:20 pm
- Bike owned: FZR400 3EN1
- Contact:
Re: Clutch - FZR400 - Will 1992 3tJ clutch basket fit my 1WG?
The 3TJ parts catalogue says that:
the 3TJ1 use the 1WG basket, clutch boss and the 1WG pressure plate (37F-16351-00)
the 3TJ2 onwards uses the better 2TK basket, clutch boss and pressure plate - but also uses 2TK transmission axles.
What year did the 3TJ show up? The 3TJ1 is the RR, the later models are RR-SP. The 2TK clutch set held an extra clutch disc if I remembered correctly, so is an upgrade to the 1WG. Dunno if it fits the 1WG axle shaft, unfortunately...
the 3TJ1 use the 1WG basket, clutch boss and the 1WG pressure plate (37F-16351-00)
the 3TJ2 onwards uses the better 2TK basket, clutch boss and pressure plate - but also uses 2TK transmission axles.
What year did the 3TJ show up? The 3TJ1 is the RR, the later models are RR-SP. The 2TK clutch set held an extra clutch disc if I remembered correctly, so is an upgrade to the 1WG. Dunno if it fits the 1WG axle shaft, unfortunately...