NC30 carb needle jets

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
RickOliver
Site Supporter
Site Supporter
Reactions:
Posts: 536
Joined: Sun May 11, 2008 8:55 am
NC30 carb needle jets

Post by RickOliver » Wed May 20, 2020 8:50 pm

Main needle jets for NC30 carbs - these tend to wear oval with time and have never been available as a spare part from either Keihin or Honda. The ones supplied in Chinese carb service kits don`t fit or work properly so I have had a batch of accurate replicas made.

Removal of the originals is fairly simple, just using a hammer and a small steel punch - fitting the new ones requires a special hollow nosed drift to avoid damaging the upper end of the jet and I will supply this with the kit - price for a set of 4 jets including the fitting tool is £38.

Rick

richyrd5
Senior Member
Reactions:
Posts: 1351
Joined: Fri Feb 21, 2014 1:31 pm
Re: NC30 carb needle jets

Post by richyrd5 » Thu May 21, 2020 7:40 pm

Excellent idea and worthy of copying....so many are fueling wrong because of this...and usually takes a long time to suss it's the needle jet ovalled!!


Post Reply