CLUTCH PLATES

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
LKey
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 22
Joined: Wed Aug 07, 2013 12:53 am
CLUTCH PLATES

Post by LKey » Wed Mar 27, 2019 9:48 am

Hi all,
The steel plates of my 2TK clutch are 2mm to 2.05mm thick.
I'm looking for matching steel plates with a thickness of 2.3mm to 2.8mm
Does anyone know a source for thicker plates?
Are there any other models with matching plates?
Cheers

buzzawak
Settled in member
Reactions:
Posts: 222
Joined: Mon Apr 06, 2009 1:22 am
Re: CLUTCH PLATES

Post by buzzawak » Wed Mar 27, 2019 11:34 am

i would love to know why you want thicker plates ?

LKey
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 22
Joined: Wed Aug 07, 2013 12:53 am
Re: CLUTCH PLATES

Post by LKey » Wed Mar 27, 2019 12:01 pm

I'll need a bit more clearance when using a slipper clutch

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9490
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: CLUTCH PLATES

Post by Evilchicken0 » Thu Mar 28, 2019 3:03 pm

I don't know and source for that … the 600 3he, 4JH foxeye and Thundercat will probably it but I don't know the thickness. Maybe a the 750 or 1000 fzr / thunderace, you might be able to get 1 to see if it fits.

Failing that could you try to get more throw on the slave mechanism

Have you asked the makers of the slipper clutch what they might do, or if yours is from a different bike to the 2tk what the plates are

buzzawak
Settled in member
Reactions:
Posts: 222
Joined: Mon Apr 06, 2009 1:22 am
Re: CLUTCH PLATES

Post by buzzawak » Fri Mar 29, 2019 3:05 am

LKey wrote:
Wed Mar 27, 2019 12:01 pm
I'll need a bit more clearance when using a slipper clutch
Very interesting

LKey
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 22
Joined: Wed Aug 07, 2013 12:53 am
Re: CLUTCH PLATES

Post by LKey » Tue Apr 02, 2019 3:40 am

Problem solved
I bought 2 Barnett plates 1.4mm thick


Post Reply