My gk 76 keeps fouling the plugs . The carbs got a new kit in from litetek. The needle c clip
is in the second from top groove and the mixture screw 2 turns out .
Main jet 100#
Pilot jet 47.5#
The plugs are wet after about 10 minutes and the fan does not come on.
If I clean the plugs it starts and idles but, then it start to mis fire again. Do
I turn the mixture screw in or out ?
Gk 76 fould plugs
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
moforockband
- Familiar Member
- Posts: 378
- Joined: Wed Jun 03, 2015 9:41 am
- Bike owned: GK73a SP CRM250 mk3
Re: Gk 76 fould plugs
Wind them in to 1 3/4 turns. Make sure your carb balance is correct, idels around 1000rpm and has no air leaks.