CBR400RR exhaust thread

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
xchristischenx
Settled in member
Reactions:
Posts: 3
Joined: Sun Aug 16, 2015 9:20 am
Bike owned: CBR 400RR (NC23)
Location: Germany
Re: CBR400RR exhaust thread

Post by xchristischenx » Sun Sep 20, 2015 10:50 am

Hey guys, look at this soundcheck of a honda cbr 400rr with the scorpion exhaust!
It sounds amazing!

https://www.youtube.com/watch?v=P6d4zXwoxkA

ESCAPE
Settled in member
Reactions:
Posts: 11
Joined: Wed Apr 29, 2015 6:36 pm
Bike owned: CBR400rr NC23, 1977 CB550f
Re: CBR400RR exhaust thread

Post by ESCAPE » Sat Jan 16, 2016 7:26 pm

Does anyone know if a CB400sf (NC31) exhaust will fit an NC23? Im seeing some systems that are listed to fit both..

http://page17.auctions.yahoo.co.jp/jp/a ... v416602270

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Sun Jan 17, 2016 5:00 pm

I can't help with this but if you are after an exhaust I have a moriwaki one I'd sell

ESCAPE
Settled in member
Reactions:
Posts: 11
Joined: Wed Apr 29, 2015 6:36 pm
Bike owned: CBR400rr NC23, 1977 CB550f
Re: CBR400RR exhaust thread

Post by ESCAPE » Mon Jan 18, 2016 5:13 am

I picked up this NC31 exhaust for just over 10k yen yesterday so I will give it a try and post back in this thread if it fits. It seems the NC31 pipes are easier to find.. especially the titanium ones

Image

If it doesn't fit I may take you up on that moriwaki.. although a titanium system would be nice..

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Mon Jan 18, 2016 1:42 pm

From looking at that briny think it would fit, the header section looks completely different to a cbr400 exhaust

ESCAPE
Settled in member
Reactions:
Posts: 11
Joined: Wed Apr 29, 2015 6:36 pm
Bike owned: CBR400rr NC23, 1977 CB550f
Re: CBR400RR exhaust thread

Post by ESCAPE » Tue Jan 19, 2016 1:29 am

In what way does it look different to you? Keep in mind the pipes are just loosely sitting in the collector and not sitting straight at all so its hard to tell. I was thinking the header pipes might look a little longer.. Im not going to know until it gets here and its a bit of a gamble for sure, so we'll see i guess

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Wed Jan 20, 2016 1:21 pm

It looks the wrong angle coming down from where the headers are

matt69
Settled in member
Reactions:
Posts: 219
Joined: Thu May 01, 2008 6:19 am
Bike owned: NC29, CBR6F2
Location: Mareeba, Australia
Re: CBR400RR exhaust thread

Post by matt69 » Tue Jan 26, 2016 12:38 am

ESCAPE wrote:I picked up this NC31 exhaust for just over 10k yen yesterday so I will give it a try and post back in this thread if it fits. It seems the NC31 pipes are easier to find.. especially the titanium ones

Image..
The NC31 outer 2 exhaust ports are angled to clear the frame down tubes. It won't fit unfortunately

gravis
Settled in member
Reactions:
Posts: 62
Joined: Sun Sep 21, 2014 1:54 pm
Re: CBR400RR exhaust thread

Post by gravis » Thu Feb 11, 2016 4:12 pm

Sorry if this has already been covered but does anyone know what the exhaust can fitment is for an nc29? I have Graeme France race headers so can look at slip on's or 3 stud (with adapter). I have a two brothers exhaust on my CBR600F and like the sound of that so would go with one for the 400 if I knew what to get and if it would fit ok...

gravis
Settled in member
Reactions:
Posts: 62
Joined: Sun Sep 21, 2014 1:54 pm
Re: CBR400RR exhaust thread

Post by gravis » Thu Mar 17, 2016 8:44 am

Well i've decided to go with an Aluminium end can from Graeme France which will go nicely with my GF race headers. I intend to make video of it when i get around to fitting so Ill put a link up on here when thats done. :grin:


Post Reply