A long time...
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 12
- Joined: Tue May 20, 2008 7:05 pm
A long time...
and I only have crappy phone images!
Fairing is not the best but its finally built and presentable
Fairing is not the best but its finally built and presentable
-
- Site Supporter
- Reactions:
- Posts: 1670
- Joined: Tue Apr 29, 2008 8:56 pm
- Bike owned: NC30 Road, SV650 Race
- Location: Hampshire, Wichester
Re: A long time...
ooo liking the front end, what is that from?
and what make are those crash bungs do you know, im looking to put crash bungs on a tyga project but would have to drill them, so i thought if im going to dril them i may as well put them in the most protecting place
and what make are those crash bungs do you know, im looking to put crash bungs on a tyga project but would have to drill them, so i thought if im going to dril them i may as well put them in the most protecting place
-
- Settled in member
- Reactions:
- Posts: 12
- Joined: Tue May 20, 2008 7:05 pm
Re: A long time...
RVF400 front end, CBR600rr calipers and master cylinder. Maxton rear shock.
Crash protectors from ebay, r & g IIRC, had to cut fairing
Crash protectors from ebay, r & g IIRC, had to cut fairing
-
- Site Supporter
- Reactions:
- Posts: 1027
- Joined: Wed Apr 30, 2008 8:40 pm
- Bike owned: zx9r c1
- Location: killin,scotland
Re: A long time...
liking the front end also,whats needed for the conversion......obviously the usd forks but what about yokes etc
please,god,....give me the chance to prove that winning the lottery won't spoil me!!!
- hannakournikova
- Site Supporter
- Reactions:
- Posts: 769
- Joined: Wed Apr 30, 2008 6:46 pm
- Bike owned: NC30, NC35 & SP2
- Location: Belfast, Northern Ireland
Re: A long time...
use RVF yokes. you either need to get a spacer kit made up or you need to get the stem shortened (thats what i did) if thruth be told, i wouldnt attempt it again...wullvfr wrote:liking the front end also,whats needed for the conversion......obviously the usd forks but what about yokes etc
-
- Settled in member
- Reactions:
- Posts: 12
- Joined: Tue May 20, 2008 7:05 pm
Re: A long time...
My yokes have been shortened to avoid spacer kit.I have found that the turning circle has been reduced though using these forks - just a pain for moveing around in town etc. Thes bikes were built for the open road though :)
-
- Settled in member
- Reactions:
- Posts: 12
- Joined: Tue May 20, 2008 7:05 pm
Re: A long time...
And now has passed its mot this morning, although advisory to tighten the head bearings, typical I cant find my 41mm socket for love or money!