Fork Compression oring - OEM Part?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
StrayAlien
- Familiar Member
- Posts: 361
- Joined: Sun Jan 15, 2012 9:27 am
- Bike owned: NC30, Dukes, Hog
- Location: Melbourne, Straya
Fork Compression oring - OEM Part?
Hi all,
Reassembling my '93 NC30 forks in the wee small hours. I have racetek internals up front. The oring on the compression damping assembly has a nick in it. As such:
Looking at the parts catalogue I don't see anything there for a compression assembly at all.
Anyone know if this is a racetek part or a honda part redeployed into the above assembly?
Many thanks.
Reassembling my '93 NC30 forks in the wee small hours. I have racetek internals up front. The oring on the compression damping assembly has a nick in it. As such:
Looking at the parts catalogue I don't see anything there for a compression assembly at all.
Anyone know if this is a racetek part or a honda part redeployed into the above assembly?
Many thanks.
-
StrayAlien
- Familiar Member
- Posts: 361
- Joined: Sun Jan 15, 2012 9:27 am
- Bike owned: NC30, Dukes, Hog
- Location: Melbourne, Straya
Re: Fork Compression oring - OEM Part?
Questions answered: Racetek. The local representative actually has them in stock! :-) Nice one.
-
JZH
- Site Supporter
- Posts: 249
- Joined: Mon Oct 27, 2008 7:02 pm
- Bike owned: RSCBRRVFVFRST
- Location: London, UK/So.Cal., USA
- Contact:
Re: Fork Compression oring - OEM Part?
Honda doesn't sell fork internal parts separately, but an o-ring is usually just an o-ring...
Match the ID and section width and you're pretty much done. There's a UK source for o-rings I've used before... Let me see if I can dig it out.
[TIME PASSES]
[MORE TIME PASSES]
Found it: http://www.polymax.co.uk/o-rings/
Most big bike shops/mail order places sell assortments of o-rings, too, but if you need a specific size, Polymax will have it.
Ciao,
Match the ID and section width and you're pretty much done. There's a UK source for o-rings I've used before... Let me see if I can dig it out.
[TIME PASSES]
[MORE TIME PASSES]
Found it: http://www.polymax.co.uk/o-rings/
Most big bike shops/mail order places sell assortments of o-rings, too, but if you need a specific size, Polymax will have it.
Ciao,
-
StrayAlien
- Familiar Member
- Posts: 361
- Joined: Sun Jan 15, 2012 9:27 am
- Bike owned: NC30, Dukes, Hog
- Location: Melbourne, Straya
Re: Fork Compression oring - OEM Part?
Hey thanks, saved the link.
btw, I've been over your vsource site quite a number of times. The racetek section has been very useful. Thanks. :)
btw, I've been over your vsource site quite a number of times. The racetek section has been very useful. Thanks. :)
-
JZH
- Site Supporter
- Posts: 249
- Joined: Mon Oct 27, 2008 7:02 pm
- Bike owned: RSCBRRVFVFRST
- Location: London, UK/So.Cal., USA
- Contact:
Re: Fork Compression oring - OEM Part?
Thanks! Sorry, I didn't notice that you were in Oz, but I'm sure there are plenty of places to buy o-rings there. The trick is to find them in small quantities, or useful assortments. Here's one in Europe, but I'm sure there are sources local to you as well: http://www.louis.de/_103a36ba89d8416307 ... r=10003060
Ciao,
Ciao,