Honda Britain nc30

[Tim400GB]

Give with one and take with the other dont you . Just copied the original race bike.

Got the standard brakes back on the bike and all working this morning.
Need to give the bike a good run and bed it all in.

[tmjns796]

looks like you had the same idea as me 89 foggy tt rep? .... bit awkward! My fairing is just being finished off. though its a race fairing, no lights or what not. hope you dont mind! top build mate, looks the nuts!

[Tim400GB]

Cheers, no problem with me buddy.
Shes already been on the road for a year like this

[royster81]

You need to whore another picture of it now with the new calipers fitted.

[Worther]

Very nice, great photos as well showing build....thanks

[Tim400GB]

Cheers mate

Ah go on then, here you go


Had a shuffle around in the garage so this bike is in prime location for servicing. Started up fine today too

[donk]

Real nice I like it well done

[Tim400GB]

So this weekend she got a general service and check over.
Oil, filter, air filter and plugs. Run up to temperature no problems.
Still a few things to check and lube up but I'll run through the rest of the service sheet before the MOT.

[Tim400GB]

With the service and check over complete I found out that the brakes were binding quite badly, so off came the calipers again but for a complete strip down this time and new seals were ordered. Should have just done this to start with.

Wanted to get more pictures as I was doing the job but I was rather pushed for time.

Left (with new seals, copper slip and red rubber grease)


Right with old and new seals


Thought it be silly not to put new lines on seeing as I had to take it all apart.


All done and on the bike



Just made my slot in time, thats the kind of MOT I like

[tmjns796]

this bike is beautiful!