Help please nc21 choke

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
lukiooo
Settled in member
Posts: 13
Joined: Mon Sep 24, 2012 8:25 am

Help please nc21 choke

Post by lukiooo » Sat Oct 13, 2012 2:56 pm

Hi I am in need of assistance as I am stumped! I bought the bike without the choke cable as it had a cable tie before but I had seen one on eBay so decided to change it!
I have fitted the handlebar end but I have no idea with the opposite pin goes! I can't see any catch just a pin end and at the same block it has a screw! Any help is much appreciated
Luke

User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: Help please nc21 choke

Post by CMSMJ1 » Sat Oct 13, 2012 11:50 pm

I use a choke cabl....racer chic..


However, I would expect that there is a small bracket on the front of the carbs - is there not an actuation arm you can see?

get is a pic - I don't know the 21 carbs by sight
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: Help please nc21 choke

Post by Neosophist » Sun Oct 14, 2012 10:43 am

they look nigh on similar to the nc30 carbs.

someone will find a picture.

at the front of the carbs there is an arm with a hole in it for the cble to attach to.

next to that there is a clamp to hold the cable which is opened with a screw.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

Post Reply