some random problem
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Hogdigerdy Dog
- Site Supporter
- Posts: 545
- Joined: Mon Sep 14, 2009 6:34 pm
- Bike owned: FZR400RR 3TJ, ZX9R fighter
- Location: Dorsetshire
Re: some random problem
i'd just remove the crome cover and make sure the valve is opening/closing properly,
as EC said you should see it turning one way then the other, if not disconnect the cables and try it by hand to make sure the valve turns, as it's more likely to be the servo that's US than the valve and a new servo is cheep cheep
if the valve is actually jammed, then that's when the problems start
as the alen bolts that hold the valve in place will be corroded and a right bitch to get out and 9 time out of 10 you'll have to drill the buggers out
as EC said you should see it turning one way then the other, if not disconnect the cables and try it by hand to make sure the valve turns, as it's more likely to be the servo that's US than the valve and a new servo is cheep cheep
if the valve is actually jammed, then that's when the problems start
as the alen bolts that hold the valve in place will be corroded and a right bitch to get out and 9 time out of 10 you'll have to drill the buggers out