Suitable sealant!?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Suitable sealant!?
Hey all,
Almost done rebuilding my NC30 engine, but have a question regarding sealant. Haynes says use a suitable sealant on the grommets that the pulse coil gen. wires and the stator wires run through. Any idea, what sealant would be suitable? I don't want to use anything that will gunge it up badly.
Also, on the rocker arm plugs, they say use a suitable sealant. Doesn't look like thread lock in the pic and when I took them out, it was a light green colour. Any ideas what to use here?
Cheers
Luke
Almost done rebuilding my NC30 engine, but have a question regarding sealant. Haynes says use a suitable sealant on the grommets that the pulse coil gen. wires and the stator wires run through. Any idea, what sealant would be suitable? I don't want to use anything that will gunge it up badly.
Also, on the rocker arm plugs, they say use a suitable sealant. Doesn't look like thread lock in the pic and when I took them out, it was a light green colour. Any ideas what to use here?
Cheers
Luke
-
999Gomerz
- Settled in member
- Posts: 150
- Joined: Mon May 09, 2011 12:27 am
- Bike owned: Hondas, Ducati, Suzuki, Vespa
- Location: Melbourne, Australia
Re: Suitable sealant!?
Same sealant for all Honda Engines. The black High Temprature Three bond.