oscillating temp needle - AC/engine speed?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
hutchwilco
Settled in member
Posts: 10
Joined: Thu Feb 24, 2011 11:49 am
Bike owned: gk71b 85 gsxr400wr
oscillating temp needle - AC/engine speed?

Post by hutchwilco »

85 GK71B...

oscillating temp needle - gets more vigorous with engine speed - as in full extreme - so fast it's a blur back and forth
Seems like some AC signal is getting through and causing it to oscillate - maybe a bad rectifier?
checked battery charging and still seems ok there.

Any ideas?

Also finding random moments where all lights die, and come back on randomly later on.
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: oscillating temp needle - AC/engine speed?

Post by Variablevalves suck »

Could be the reg/rec on its way out or possible its a short and the temp gauge could be picking up the rev counter signal.
Have a good look around the connectors and where the loom bends around the head stock.
hutchwilco
Settled in member
Posts: 10
Joined: Thu Feb 24, 2011 11:49 am
Bike owned: gk71b 85 gsxr400wr
Re: oscillating temp needle - AC/engine speed?

Post by hutchwilco »

ok thanks rev counter pickup is a good suggestion.

I've been tracing the wiring to find the general lights out fault, and found the rectifier when tested according to the manual shows no circuit beween ANY of the terminals - the manual says any multimeter besides a suzuki tester won't give the correct reading but I get nothing on ALL of them... wonder how my bike has been running/charging all this time if it hasn't been working? I'll post another question for the rectifier
hutchwilco
Settled in member
Posts: 10
Joined: Thu Feb 24, 2011 11:49 am
Bike owned: gk71b 85 gsxr400wr
Re: oscillating temp needle - AC/engine speed?

Post by hutchwilco »

for the record to help others-
found the problem behind the instrument cluster - btw it's much easier than I thought to remove the front fairing - a melted connector (prob from some shorting of the battery teminals at some point ) was allowing temp gauge and tacho to touch/interfere.

thanks for the advice

Post Reply