light switch assembly,is it a simple device

leerc · Post by **leerc** » Sat Jan 21, 2012 7:23 pm

is it going to be like pandoras box in there lol

having to fiddle with the switch to get the lights on so must have a lpose connection

Post by **iDemonix** » Sat Jan 21, 2012 7:34 pm

NC30?

If you've not done the high beam relay mod then it could of melted inside and you'll need a new unit.

Post by **Neosophist** » Sun Jan 22, 2012 5:11 am

leerc wrote:is it going to be like pandoras box in there lol

having to fiddle with the switch to get the lights on so must have a lpose connection

AS above.. sounds like switch is melted.

If you put normal H4 headlamps into the bike (60/55w) they will melt a Japanese bikes switch gear

leerc · Post by **leerc** » Sun Jan 22, 2012 9:28 am

yeah its a jap nc30, im sure they are h4 bulbs thst are in and 60/55 rings a bell i only replaced what was alreay in so have no idea if its had the relay mod done

since i bought it iv never been off high beam as low was useless and both jap and uk bike are 60w high

Post by **Neosophist** » Sun Jan 22, 2012 11:05 am

leerc wrote:yeah its a jap nc30, im sure they are h4 bulbs thst are in and 60/55 rings a bell i only replaced what was alreay in so have no idea if its had the relay mod done

since i bought it iv never been off high beam as low was useless and both jap and uk bike are 60w high

Are your headlights aimed properly and clean?

I have standard 35/60w H4R bulbs and the low-beam is fine?

leerc · Post by **leerc** » Sun Jan 22, 2012 11:54 am

i havnt checked but i think its me being used to the car HID i have in the car

niteblade · Post by **niteblade** » Fri Feb 10, 2012 11:21 am

i had that problem.

its a simple fix, but it relapses sometimes.

you could install an external on-off switch for convenience sake!

makz2008 · Post by **makz2008** » Fri Feb 10, 2012 11:45 am

does anoyone have any pictures of this relay mod when its done?
and where i can get hold of the correct relay?

Post by **Neosophist** » Fri Feb 10, 2012 1:35 pm

makz2008 wrote:does anoyone have any pictures of this relay mod when its done?
and where i can get hold of the correct relay?

Any cheap automotive 20A relay will be fine.

http://www.vsource.org/VFR-RVF_files/NC ... mRelay.htm

Thers some pictures here

light switch assembly,is it a simple device

light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device

Re: light switch assembly,is it a simple device