DYMAG TT3's

[mo haggs]

Message:
i am interested in a set of dymag wheels - tt3\'s.
on dymags website they show a 5.00\"x17 rear wheel.

are these available as single sided?


Hi Morris,

I'm sorry but we can only do 6.0" TT3 single sided rears.
The only other single sided design we offer is in the Carbon CA5 but they also are only available in 5.5" or 6.0"




if you were approached with a request for a batch at 5.0" would you be able to have them made?
if so how many would need to be orderd.


Hi Morris,

We can get a definate 5.25" out of our casting & possibly 5" although we couldn't guarantee that until we started machining.
There would be a minimum order of 5 required. The rear wheels are usually £980 + vat each although on the required order of 5 we could offer dealer terms of 10% from that figure.
We would then keep you on the 10% terms so that you can order fronts (£820 + vat less your 10%) as & when you need them.







£2160 per set - 10% = £1944 per set

thing is - i dont have £10,000 to order a batch.

[royster81]

2nd hand mo, and spend the money on an engine overhaul

[Drunkn Munky]

Too right £2k on wheels is for lotto winners. I couldnt justify that.

[mo haggs]

2nd hand mo, and spend the money on an engine overhaul

finding them is the problem though.

[mo haggs]

Too right £2k on wheels is for lotto winners. I couldnt justify that.

i can't afford them either - was just curious.

[royster81]

There has to be some out there and it's only a matter of time before they come up for sale, I'd take a set of 2nd hand ones.

[mo haggs]

it's only a matter of time before they come up for sale, I'd take a set of 2nd hand ones.

[micpec]

Exactly my thoughts with those priced new Dymag ones For new wheels I would rather go down the PVM route sometime....

[slo12]

Hmmmmm, so what's a nice used set of Dymags worth these days ?