Broken Wires
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Chrissy_J
- Settled in member
- Posts: 107
- Joined: Mon Jan 18, 2010 5:54 pm
- Bike owned: VFR400Z NC21
Re: Broken Wires
Same here.porndoguk wrote:i just use a cigarette lighter to do my heat wrap
I soldered and crimped all my connectors, when I rewired my bike. I got some of my blade connectors and wire from Maplin (which is expensive in the long run) and some stuff from Vehicle Wiring Products. Good kit!
-
barryfzr
- Site Supporter
- Posts: 144
- Joined: Wed Apr 30, 2008 11:12 pm
Re: Broken Wires
yep solder and heat shrink for me too....
I usually forget to put the heat shrink on first mind...Doh!
...and I usually use matches to shrink the heatshrink tubing (careful round the petrol! ;o) I cant get on with using the iron to shrink it.
I usually forget to put the heat shrink on first mind...Doh!
...and I usually use matches to shrink the heatshrink tubing (careful round the petrol! ;o) I cant get on with using the iron to shrink it.
-
Deadly_Viper
- Settled in member
- Posts: 50
- Joined: Tue Nov 16, 2010 5:36 pm
- Bike owned: VFR400 NC24
Re: Broken Wires
What amp rating connectors did you use and wire? I didn't realise there were so many different ratings.