Advice Aero NC23

[madfatman]

hi all im new to posting but been reading on here for a while.

i was wondering if anyone could tell me whether the NC23 cbr RRJ or RRK, the triarm exhaust
would fit my CBR 400 RG Aero?

the bike came with a custom exhaust, stainless headers and aluminium link-pipe welded to the silencer.
this would be a really nice setup appart from the fact that the previous owner has removed all of the packing
from the exhaust so now it sounds like a formulae one car lol, its rather loud.
Now normally i would just cut, repack and re-weld it but ive never welded ally before, also i would like to just buy an exhaust that fits it, sounds nice and has a removable baffle.

any advice or known exhausts that fit would be muchly appreciated

thanks

mike

[Yakama]

Not sure,

but there is a couple of original systems on ebay:

http://cgi.ebay.co.uk/Honda-CBR400R-Aer ... 19c618f8a3

http://cgi.ebay.co.uk/HONDA-CBR400-EXHA ... 19c604bc49

[madfatman]

cheers for finding them

what you reckon the odds are that a tri-arm exhaust will fit the aero?
or do i just buy one and it fits

mike

[Yakama]

I'm not sure but i would guess that it prob wouldnt fit without mods

[madfatman]

if i have to go to the standard route, does anyone know what are the standard jets to fit the standdard exhaust ?#

mike

[amorti]

Show us a picture?

Maybe you could cut the can off an fit a universal slip-on?

[madfatman]

this is the system on it at the moment

if anyone could tell me what this system is and who makes them then that would be muchly appreciated




















cheers

mike

[madfatman]

Maybe you could cut the can off an fit a universal slip-on?

the link pipe has a 45mm external diameter and i cant find a universal pipe of that size

[amorti]

Measure the outer diameter of the can. Compare to the carbon tube here:
http://www.pjengineering.co.uk/products.asp?cat=8&pg=2

See if you can't chop the can in half, repack, and reskin it in carbon?