Thermal Conductive Paste

Post by **Man_Named_Dave** » Fri Apr 22, 2011 2:29 pm

I googled this and there's tons of stuff out there.

Anyone got a particular brand that they recommend for mounting the Reg/Rec?

Post by **Neosophist** » Fri Apr 22, 2011 4:39 pm

I dont like using compound on things that are exposed to the elements.

http://cgi.ebay.co.uk/50x50mm-Thermal-G ... 1e62923457

these thermal pads are good, they wont wash / be cleaned away and help fill the gap of the reg/reg

Post by **Man_Named_Dave** » Sat Apr 23, 2011 10:41 am

Neosophist wrote:I dont like using compound on things that are exposed to the elements.

http://cgi.ebay.co.uk/50x50mm-Thermal-G ... 1e62923457

these thermal pads are good, they wont wash / be cleaned away and help fill the gap of the reg/reg

Cheers Neo,

I've just ordered some.

amorti · Post by **amorti** » Sun Apr 24, 2011 8:35 am

Good tip. I tend to use silicon grease. Probably slightly less effective than the proper stuff but still better than nothing.

Post by **porndoguk** » Sun Apr 24, 2011 8:38 pm

i just use CPU thermal grease its white,
http://cgi.ebay.co.uk/5x-Thermal-Grease ... 1e62cb0a18

you can order 5 syringes full from ebay (comes from chine and will have to wait a fortnight)
1 syringe will do one reg/rec :D

its really good but just dont get it on your fingers is really stickey and stains everything it contacts

Rick

Thermal Conductive Paste

Thermal Conductive Paste

Re: Thermal Conductive Paste

Re: Thermal Conductive Paste

Re: Thermal Conductive Paste

Re: Thermal Conductive Paste