NC30 engine from japan
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
krisztian_andre
- Familiar Member
- Posts: 484
- Joined: Fri Oct 02, 2009 6:49 pm
- Bike owned: MG v35 II, NC30, MG NF Mil.
- Location: Germany
Re: NC30 engine from japan
Greetings
Ok, sheer stability was that worried me more because you can't really tell if the oil has tinned out like you can with the clutch. Anyways this oil is CF-4 standard
"The best S certified oils are CF, which is a relatively old and obsolete C standard, and does not include the tests for high speed high temperature engines that CG, CH, and CI have. In fact, CF oil does not meet the current factory standards for Volkswagen or Mercedes diesel passenger cars."
God knows.
Where do you buy spark plugs? I'm looking for iridium ones but the 4xdenso iridium are more than 100 usd on fleebay. Oh and what are you using for tank rubbers?
Chris
Ok, sheer stability was that worried me more because you can't really tell if the oil has tinned out like you can with the clutch. Anyways this oil is CF-4 standard
"The best S certified oils are CF, which is a relatively old and obsolete C standard, and does not include the tests for high speed high temperature engines that CG, CH, and CI have. In fact, CF oil does not meet the current factory standards for Volkswagen or Mercedes diesel passenger cars."
God knows.
Where do you buy spark plugs? I'm looking for iridium ones but the 4xdenso iridium are more than 100 usd on fleebay. Oh and what are you using for tank rubbers?
Chris
-
g-force performance
- Familiar Member
- Posts: 288
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Re: NC30 engine from japan
Hi Guys!
We are looking for VFR and RVF engines as well. We tried to buy some from Tyga, but they only had one or two torn down engines. Like already mentioned, the shipping was more than the engines. We were hoping to find enough engines to make shipping worth it to the USA. Are there any other people here in the USA on this list that are interested in a group-buy for engines?
For us, we need good cranks, cams, heads (the valves cam be worn outr, juts not blown up). Mainly we NEED transmissions!!!!!!!! So, something that has been ridden around in 1st gear, 2nd gear all day long. Those would be perfect.
Let me know. We're in deep need.
Mike Norman
G-Force Engine Development
http://www.mngforce.com
We are looking for VFR and RVF engines as well. We tried to buy some from Tyga, but they only had one or two torn down engines. Like already mentioned, the shipping was more than the engines. We were hoping to find enough engines to make shipping worth it to the USA. Are there any other people here in the USA on this list that are interested in a group-buy for engines?
For us, we need good cranks, cams, heads (the valves cam be worn outr, juts not blown up). Mainly we NEED transmissions!!!!!!!! So, something that has been ridden around in 1st gear, 2nd gear all day long. Those would be perfect.
Let me know. We're in deep need.
Mike Norman
G-Force Engine Development
http://www.mngforce.com