Advice Needed - Rear Brake Hose NC30
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
porndoguk
- Site Supporter
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: Advice Needed - Rear Brake Hose NC30
well i got some red rubber grease on a cotton wool bud to catch any swarf when i removed, then cleaned the grease out then tightened it up and to my suprise no thread damage
the one side is a m10 1.00 pitch the other was m10 1.25pitch
the 1.00 measured 9.29mm and
the 1.25 measured 9.85mm so i guess it was a case of the 1.00 just catching the threads.
alls well tho.
the one side is a m10 1.00 pitch the other was m10 1.25pitch
the 1.00 measured 9.29mm and
the 1.25 measured 9.85mm so i guess it was a case of the 1.00 just catching the threads.
alls well tho.
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
-
geebus
- Site Supporter
- Posts: 58
- Joined: Fri Jan 07, 2011 7:56 pm
- Bike owned: 1990 VFR400 NC30 + SV650s
- Location: Inverclyde
- Contact:
Re: Advice Needed - Rear Brake Hose NC30
That is almost as bad as the time a got a new socket set and couldn't get the bit on...only to ask a mate who then pushed a button on the back and said to me "Every day is a school day!"