'29 back wheel in a '23?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
veefer400
- Familiar Member
- Posts: 408
- Joined: Fri Jul 25, 2008 4:36 pm
- Bike owned: Ducati 900SS, 1978 Cafe 400/4
- Location: Trowbridge, Wilts
Re: '29 back wheel in a '23?
Would suggest red loctite to stop it getting any looser, etc?
This site is Rather Good!
http://www.gearingcommander.com/
This site is Rather Good!
http://www.gearingcommander.com/
-
w00dzy
- Site Supporter
- Posts: 514
- Joined: Sun Oct 12, 2008 10:44 pm
- Bike owned: Aprilia RSVR Mille
- Location: Hampshire
Re: '29 back wheel in a '23?
It is fairly loose.. Im considering a new wheel as I dont want it getting really bad! My bike shop said that I should replace it 
They were only powder coated recently...
Any other suggestions for repair?
Anyone have a rear wheel for sale in good condition preferably in white..
wonder if a white front and gold rear would look any good??
They were only powder coated recently... Any other suggestions for repair?
Anyone have a rear wheel for sale in good condition preferably in white..
wonder if a white front and gold rear would look any good??
-
veefer400
- Familiar Member
- Posts: 408
- Joined: Fri Jul 25, 2008 4:36 pm
- Bike owned: Ducati 900SS, 1978 Cafe 400/4
- Location: Trowbridge, Wilts
Re: '29 back wheel in a '23?
viewtopic.php?f=17&t=20665w00dzy wrote:It is fairly loose.. Im considering a new wheel as I dont want it getting really bad! My bike shop said that I should replace it
Any other suggestions for repair?
Anyone have a rear wheel for sale in good condition preferably in white..
wonder if a white front and gold rear would look any good??
Voila! Have purloined an MC21 wheel off of Graeme...
-
w00dzy
- Site Supporter
- Posts: 514
- Joined: Sun Oct 12, 2008 10:44 pm
- Bike owned: Aprilia RSVR Mille
- Location: Hampshire
Re: '29 back wheel in a '23?
Just sent payment to GF £57 inc postage..
Thanks anyway
Thanks anyway
-
w00dzy
- Site Supporter
- Posts: 514
- Joined: Sun Oct 12, 2008 10:44 pm
- Bike owned: Aprilia RSVR Mille
- Location: Hampshire
Re: '29 back wheel in a '23?
Spoke to Graham today who advised the loctite bearing sealer can be used for a more temporary solution possibly for race bikes rather than road bikes that will cover 1000's of miles.
I did wonder why this has happened and he explained as follows...
If a bearing is not installed 100% correctly over a long period of time it will eventually warp the bearing housing..
Anyone want to buy my wheel which is in mint condition paint wise.. was done at the beginning of the year in white with a slight pearl fleck to match the nc23 bodywork. It is a nc29 rear wheel..
I did wonder why this has happened and he explained as follows...
If a bearing is not installed 100% correctly over a long period of time it will eventually warp the bearing housing..
Anyone want to buy my wheel which is in mint condition paint wise.. was done at the beginning of the year in white with a slight pearl fleck to match the nc23 bodywork. It is a nc29 rear wheel..