Crank lock on NC29 (changing front sprocket)

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
NYKIE
Settled in member
Posts: 57
Joined: Tue May 06, 2008 1:16 pm
Location: southend
Crank lock on NC29 (changing front sprocket)

Post by NYKIE »

Hi there
Just wondering if the NC29 has an engine lock so i can get my front sprocket off

thanks
Top
blueflag
Site Supporter
Site Supporter
Posts: 145
Joined: Thu Nov 19, 2009 1:43 pm
Re: Crank lock on NC29 (changing front sprocket)

Post by blueflag »

Put the bike in 1st gear and get someone to apply the back brake whilst you crack the nut. Should work a treat..... :grin:
Top
NYKIE
Settled in member
Posts: 57
Joined: Tue May 06, 2008 1:16 pm
Location: southend
Re: Crank lock on NC29 (changing front sprocket)

Post by NYKIE »

The only problem is there is no chain on the bike! looks like i;m going to have to get an impact gun

thanks
Top
Adrian89
Settled in member
Posts: 75
Joined: Mon Oct 20, 2008 11:34 pm
Bike owned: NC23 and '05 Blade
Location: Nottingham
Re: Crank lock on NC29 (changing front sprocket)

Post by Adrian89 »

On the 23 engine you can just jam a thick socket between the teeth of the old sprocket and the engine, then the bolt comes out easily with a reasonable length breaker bar.
Top
NYKIE
Settled in member
Posts: 57
Joined: Tue May 06, 2008 1:16 pm
Location: southend
Re: Crank lock on NC29 (changing front sprocket)

Post by NYKIE »

Sorted now!! thanks guys!!
Top
Post Reply

Return to “Honda - General”