NC35 rectifier

[Neosophist]

ref the wiring on this pic mine has double red/white and green wires that were coming to the plug and on to the regulator 7 wires in total is there a reason for this its a uk spec larger finned reg at present that i wish to replace with an r6 5 spade unit ? i have already removed plug and soldered bullets retaining double connections should i still double up onto regulator ?

[/quote]

Yep.. they goto the same place!



As you can see here... I have an R6 Reg/Rec on an NC24.

There are two green and two red wires.. I made my own loom for it by cutting the loom off a dead electrexworld reg/rec (as the loom is fixed to the reg/rec on the NC24 and is really long! Which is perfect for relocating it)

Anyway.. The one end of the loom has the usual plugs, the other I cut and soldered to spade connectors.. I just twisted the two green wires together and soldered them to the spades.

Really stable voltage right through the rev range. Lights never go dim anymore either. Doesn't get as hot as the old one.