The Exhaust Thread

[CMSMJ1]

Mark, im sure the guy you brought that off sent me pics of the system fitted to his NC????? I dont doubt you for one minute in your measurement but that does seem odd. Could the system not be cut and rewelded to shorten it? be a shame to lose a full TI system.

The guy I got it from never fitted it - he could not figure out the collars it requires - so I bought some.

The rear section looked OK fitted but I never dry fitted the fronts - as fronts are fronts...

It is bloody long and I am pretty wounded about losing the dream ticket! However, if I get the RC30 people to confirm this is for them then I'll wang it on the bay and see what I can get - I only want to cover my costs so it won't be horrific money.

saying that, I hope to get enough for a nice full system. I have a jap sprung hlaf already but as I am a wannabe, this no longer floats my boat.

[viper_biker]

Get in touch with Stephen A'Lee, I'm sure he'll be able to ID it for you.

[Martin]

Mark, take a look at my reply in the other thread regarding this. You're gonna be rich!

[CMSMJ1]

Cheers chaps... the jungle drums are beating and I am just checking my northern monkey to plymouth guru dictionary has the right phrases

rich you say Martin.... Would be cool...but I'd only sploink it on some other pimp action for the no9. Like a rebore, pistons and pipes..ahem!

[james66]

Ive got a full micron system on my race bike
4-1 with alloy can, never seem another one since i bought it back in 2005 off ebay for £280
can i well scuffed up + had a repair on the link pipe where i came off + dented it in but other than that its fine
Will try + get some pics over the weekend
Ricky at RLR confirmed its identical to the ones micron were making for the honda britain nc's all them years ago

James

[hunter]

I'v got one of them james,did have two one stainless one mild steel,i still have the stainless one.

[andreasmkr]

Here is my exhaust system. No idea what brand but I think it looks nice! Has a sticker with a V on the pipes.



Bike where imported from Thailand

[alexwitham]

Tyga:

[micpec]

@Andreasmkr: it looks like a custom fitted highmount end can (so it clears the space for putting the left foot on the peg).

Do you have close up pics of the exhaust tubing/pipeworks underneath the lower fairing & near the linkage system?

[andreasmkr]

@Andreasmkr: it looks like a custom fitted highmount end can (so it clears the space for putting the left foot on the peg).

Do you have close up pics of the exhaust tubing/pipeworks underneath the lower fairing & near the linkage system?

I`m currently living in the US and my bike is back home in Norway, but I can try to get somebody to take some pictures of it. I`ll post them here when I get them.