So long story short after selling my road nc30 and track nc30 I couldn't resist and I'm.back again .
I was having a look in the usual places and couldn't find anything cheap enough to sink some cash into untill I found this beauty.
I believe it's been off the road for the last 10 years and it's rough but not beyond saving.

https://flic.kr/p/28QUUgW
https://flic.kr/p/27bzGvm
https://flic.kr/p/29WpCGF

Not to sure on the mph face as you loose some of the millage digits

https://flic.kr/p/29SaGz3

Luckily it also came with a huge amount of spares and a good few original fairing parts in various states and a couple of good tanks.

https://flic.kr/p/MNRNBb
https://flic.kr/p/28yrQAv
https://flic.kr/p/29WpChc

Plenty to sort through and sell , plans are for a decent spec but nothing over the top , decent shock , 17" rear, aftermarket system etc but we all know how it ends up.

Nice to see you start another build Marcus!
If you have a spare oem nosecone in decent shape, keep me in mind please as i need one.
I'll also have an rvf rear wheel available so could work for both of us!

VicNew wrote: ↑

Thu Aug 09, 2018 7:28 pm

Nice to see you start another build Marcus!
If you have a spare oem nosecone in decent shape, keep me in mind please as i need one.
I'll also have an rvf rear wheel available so could work for both of us!

I've got 3 here and I don't plan on using any of them , I'll fire you over a pm.

that mph face ...

welcome back marcus

Not sure why the pictures have come thorough as a link instead of embedding themselves as an image , any ideas(I'm not very technical)

Anyway , after a good check over the bike and parts were covered in years of junk and there was plenty of mouse droppings although there's no damage to the loom or anything, so I pulled it on to drive and gave everything a proper good scrub down so I didn't have to de contaminate myself.
I pulled a few more bits off to make cleaning it easier and bagged up the wiring loom/electronics.

https://flic.kr/p/LkjMct

After a good scrub and up on the bench ready to be striped down

https://flic.kr/p/28HdBxZ

https://flic.kr/p/2a1Zp2J

So I had originally planned a simple job but Its to far gone for that , I do have a nice tidy frame with a private plate on that I can't remove untill the it has been mot'd.
I have just worked out a list of things that I want to do as to be honest to price is scary , probably things I don't need but I don't plan on doing it again so I'm thinking of the do it once do it right approach.

After my latest discovery the bike is to be renamed the boat anchor , front right and rear left inlets.

https://flic.kr/p/LkuKHg
https://flic.kr/p/2a2anSQ

Well that’s not good

Sad to see that

Hmmmm, not so good.

I may have some bits to help you out though. Thanks to the fuckwits at My Hermes dropping and breaking my crankcase.... I still have most of the rest of the engine (less gearbox) laying around as spares.

I am currently sat at the airport waiting to pick someone up, but can send you some photos later if you want

Thanks for the offer , Scott tagged me in a Facebook post for a chap selling another project bike thats complete but needs some restoration but it does come with a few nice bits. Although it's not ideal buying another and it's eaten into the budget for blingy bits at the moment once I keep what I need I should be able to make a good bit of my money back, picking it up Sunday so hopefully all's good with it