Marcus's Honda nc35 RT
-
- Site Supporter
- Reactions:
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Marcus's Honda nc35 RT
Thought I'd get this started on my way back from collecting it , 3/4 of the way back on a 650 mile round trip. Proper bored now .
I've been after a 35 for a while but I had a strict budget I wanted to stick to , nothing really came along apart from crm's bike a few weeks ago until this one turned up on eBay , although it was nearly twice my budget the previous owner had spent a fortune on it and has done most if the hard work , cheers!
A quick run down of the bike and spec
96 nc35 RT colour scheme
Stripped down to frame and engine
All brackets and fixings re painted or powder coated
All bearings replaced , rebuilt forks and calipers
Brand new RT fairings from honda , including upper , mids , lowers , v piece , mud guard and seat unit
Tank re sprayed
New Nitron track shock
New tyga system
New tyga rearsets
Tyga leavers
Samco hoses
Carbon infills
Re covers seats ect ect
As you can see the previous owner has completed most of the hard work and then left it for 18 months .
I have a few things to do to get it on the road , replace genny windings , rebuild the master cylinders with the kits supplied and to fit the bodywork , it also came with a bag containing most of the fairing bolts new from honda .
There are a couple of small things I would like to do but I'm skint for a while .
I will get some pics up when I'm home .
I've been after a 35 for a while but I had a strict budget I wanted to stick to , nothing really came along apart from crm's bike a few weeks ago until this one turned up on eBay , although it was nearly twice my budget the previous owner had spent a fortune on it and has done most if the hard work , cheers!
A quick run down of the bike and spec
96 nc35 RT colour scheme
Stripped down to frame and engine
All brackets and fixings re painted or powder coated
All bearings replaced , rebuilt forks and calipers
Brand new RT fairings from honda , including upper , mids , lowers , v piece , mud guard and seat unit
Tank re sprayed
New Nitron track shock
New tyga system
New tyga rearsets
Tyga leavers
Samco hoses
Carbon infills
Re covers seats ect ect
As you can see the previous owner has completed most of the hard work and then left it for 18 months .
I have a few things to do to get it on the road , replace genny windings , rebuild the master cylinders with the kits supplied and to fit the bodywork , it also came with a bag containing most of the fairing bolts new from honda .
There are a couple of small things I would like to do but I'm skint for a while .
I will get some pics up when I'm home .
- Zippy
- Site Supporter
- Reactions:
- Posts: 684
- Joined: Tue Mar 24, 2009 1:41 pm
- Location: South West
Re: Marcus's Honda nc35 RT
No. Pull over, get the bike out of the van and take some pictures now . I can't wait till later.
-
- Site Supporter
- Reactions:
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: Marcus's Honda nc35 RT
Not the best but here is a few
- Zippy
- Site Supporter
- Reactions:
- Posts: 684
- Joined: Tue Mar 24, 2009 1:41 pm
- Location: South West
Re: Marcus's Honda nc35 RT
Looking very nice indeed. I bet you're chuffed to buggery.
-
- Site Supporter
- Reactions:
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: Marcus's Honda nc35 RT
Yeah I can't wait to get it sorted although I doubt it will get a massive amount of use as I don't want to ruin it .
Those horrid front discs will be coming off at some point aswell .
Those horrid front discs will be coming off at some point aswell .
-
- Settled in member
- Reactions:
- Posts: 75
- Joined: Sun Jul 01, 2012 10:25 pm
- Bike owned: vfr 400 nc30
- Location: south wales
- Contact:
Re: Marcus's Honda nc35 RT
I will take them discs off your hands. If you are willing to trade or sell
-
- Site Supporter
- Reactions:
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: Marcus's Honda nc35 RT
im going to keep them and fit them to my track bike wets
-
- Site Supporter
- Reactions:
- Posts: 351
- Joined: Tue Feb 14, 2012 9:12 pm
- Bike owned: NC30 x4, VTR1000 Firestorm
- Location: Co Down
Re: Marcus's Honda nc35 RT
Looks like a good purchase - congrats!
Look forward to more pics of this as project progresses :)
Look forward to more pics of this as project progresses :)
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: Marcus's Honda nc35 RT
Looks tidy that, is that a gold stripe round the tank or is that my eyes?
-
- Site Supporter
- Reactions:
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: Marcus's Honda nc35 RT
Cheers , it's proper tidy only thing that would really Finnish it of would be a painted engine but I doubt I will do that .
No it's a silver stripe , should it be there ?
No it's a silver stripe , should it be there ?