Another 'spare' bike

This section is reserved for members on the SITE SUPPORTERS group only. Each supporter can post pics of their bikes for all to view. Standard members can read and reply, but the post author has full control over his thread and can edit, delete & lock at will
Joey23
Settled in member
Reactions:
Posts: 17
Joined: Tue Feb 04, 2014 2:27 pm
Bike owned: NC30 - 1991
Location: West London
Re: Another 'spare' bike

Post by Joey23 » Sat Jan 03, 2015 3:01 pm

Sigma speedo all mounted, along with the RVF wheels.


Which Sigma did you go for - are you impressed with it?

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 753
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sun Jan 04, 2015 1:25 am

Not sure of the model without looking at it, it's the one with the wire to the speed sensor pick up (ie not wireless).
It's ok, the main reason I fitted it was to get through the MOT.
I've not had the opportunity to test its accuracy yet but the speed seems to match other vehicles through speed cameras.
It ticks those two boxes and that's all I was after really.

Joey23
Settled in member
Reactions:
Posts: 17
Joined: Tue Feb 04, 2014 2:27 pm
Bike owned: NC30 - 1991
Location: West London
Re: Another 'spare' bike

Post by Joey23 » Tue Jan 06, 2015 12:18 pm

Glad it's accurate! Was looking at this one -

http://www.sigmasport.com/en/produkte/m ... 2/?flash=0

Has a fair amount of extras on it and seems a reasonable price...

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 753
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sat Feb 14, 2015 6:55 pm

Never really liked the high tensile cap heads for caliper bolts.
So today I changed them for some RLR titanium ones and locked wired them

Before
Image

After
Image

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 753
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Fri Feb 27, 2015 8:50 pm

Well the bikes done 30 miles since the build so that must mean the can needs changing.
TSR goodness courtesy of Zippy, cheers bud. Bit of a clean up then it'll get bolted on.

Image

User avatar
Zippy
Site Supporter
Site Supporter
Reactions:
Posts: 684
Joined: Tue Mar 24, 2009 1:41 pm
Location: South West
Re: Another 'spare' bike

Post by Zippy » Sat Feb 28, 2015 9:45 am

Looking forward to seeing it on there.

What I really want to see though is the BCF thread moved onto here;-) you know what I mean :-)

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 753
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sat Feb 28, 2015 3:35 pm

Done and done.

Image

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 753
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sat Mar 14, 2015 6:05 pm

Bit more Ti. Did the brake lever bolt too

Image
Image

User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 753
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: Another 'spare' bike

Post by Tim400GB » Sat Oct 17, 2015 5:43 pm

Went to get the bike round brands for a short shake down run.
Well until the look of the noise testers face that is.

The bike coming in at 106.9db and the limit being 105db he said there was no way :x

Bought a baffle, had to shorten it to fit and modified it get kill a few more db's.
If it is well under the limit I'll drill some holes so it flows a bit more.

Image
Image

User avatar
Drunkn Munky
Site Supporter
Site Supporter
Reactions:
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: Another 'spare' bike

Post by Drunkn Munky » Wed Nov 04, 2015 8:01 am

That looks like a very restrictive baffle mate, must have killed the top end?


Post Reply