My bike!! My thread!!!
- Sanchezz
- Settled in member
- Reactions:
- Posts: 27
- Joined: Wed Apr 30, 2008 11:40 pm
My bike!! My thread!!!
Thought i would post up pics of my nc29, i wasn't going to bother as im sure everyone seen them on the old forum but i just want to abuse use my new founded powers and make a thread in this section.
what the bike was like for the first 16 years of its life.
How it spends most of its life; dirty and abused.
Then one day bordem struck and this happend
what the bike was like for the first 16 years of its life.
How it spends most of its life; dirty and abused.
Then one day bordem struck and this happend
- hannakournikova
- Site Supporter
- Reactions:
- Posts: 769
- Joined: Wed Apr 30, 2008 6:46 pm
- Bike owned: NC30, NC35 & SP2
- Location: Belfast, Northern Ireland
Re: My bike!! My thread!!!
looks cracking mate. watched this come together over the months!
- Sanchezz
- Settled in member
- Reactions:
- Posts: 27
- Joined: Wed Apr 30, 2008 11:40 pm
Re: My bike!! My thread!!!
cheers mate. The funny thing is its not even finished so many little bits that still needs done, like the infill panels below the seat and iv just fitted indicators about a week ago, will get it done some day though.
- Speedy
- NWAA Supporter
- Reactions:
- Posts: 483
- Joined: Fri May 02, 2008 8:29 pm
- Bike owned: RVF400RR, ER6n
- Location: Middx, U.K.
Re: My bike!! My thread!!!
Very good indeed!
It seems that todays 600's are nearly as small as our 'lil' 400's, coz that bodywork fits & looks very well on there!
All you need now is a 600 motor and you got the full package; I think it is possible to fit one!?
It seems that todays 600's are nearly as small as our 'lil' 400's, coz that bodywork fits & looks very well on there!
All you need now is a 600 motor and you got the full package; I think it is possible to fit one!?
When the mind is relaxed, the body will go faster!
- Sanchezz
- Settled in member
- Reactions:
- Posts: 27
- Joined: Wed Apr 30, 2008 11:40 pm
Re: My bike!! My thread!!!
Anythings possible
I remember a wile ago i was looking into it an im sure the 600 lump is to wide, i cant remember by how much but would need the frame notched/widend. bit to much work i think.
There are plenty other engines that would go in tho :)
I have more plans for the bike but at the moment the main issue is money (i cant even afford the tax) and FI systems don't come cheap more info on this later.
I remember a wile ago i was looking into it an im sure the 600 lump is to wide, i cant remember by how much but would need the frame notched/widend. bit to much work i think.
There are plenty other engines that would go in tho :)
I have more plans for the bike but at the moment the main issue is money (i cant even afford the tax) and FI systems don't come cheap more info on this later.
- w00dzy
- Site Supporter
- Reactions:
- Posts: 514
- Joined: Sun Oct 12, 2008 10:44 pm
- Bike owned: Aprilia RSVR Mille
- Location: Hampshire
Re: My bike!! My thread!!!
looks really nice.. im looking at buying a nc29 as i have just passed my unrestricted test. i have read a lot about them and they sound like great bikes.
how much did the kit set you back?
how much did the kit set you back?
-
- Site Supporter
- Reactions:
- Posts: 1670
- Joined: Tue Apr 29, 2008 8:56 pm
- Bike owned: NC30 Road, SV650 Race
- Location: Hampshire, Wichester
Re: My bike!! My thread!!!
this isnt a kit its a custom job
- Sanchezz
- Settled in member
- Reactions:
- Posts: 27
- Joined: Wed Apr 30, 2008 11:40 pm
Re: My bike!! My thread!!!
Not been on in an age but since the good weather is around an i got the bike out of the garage for the first time a month back (im not a fair weather rider but i was skint) managed to wangle a free trackday and new tyres (pilot ones) though i come an post up sum pics of the bike.
Decided the underseat exhaust looked naff, so i put the standard exhaust back on, failed the noise test at aulton pack so i had to put the standard can on it, it sounds like a broken washing machine now lol. was a good day although i wasnt a big fan of the tyres =, they wer good just not confident in them as i am with 090s
Decided the underseat exhaust looked naff, so i put the standard exhaust back on, failed the noise test at aulton pack so i had to put the standard can on it, it sounds like a broken washing machine now lol. was a good day although i wasnt a big fan of the tyres =, they wer good just not confident in them as i am with 090s