RVF Endurance AM-PM Replica build
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: RVF Endurance AM-PM Replica build
LOL- glad to see it turned up and i can make it lighter if you want.
It's 3 layers of Kev and that gives about 1mm wall. Does it fit the caps ok? i can get caps in Ti but aint sure if it will weld at home, once i get the garage up (2 weeks) i can start work properly. Ive got a load of kevlar fairing panels to vacuum for my GSXR4 and i will sort the cans with no marks, plus i will have the lathe back running so can start to machine stuff again.
Tony,the bike's looking REAL NICE! hope i can get the GSXR 1/4 as good, ive a few special parts tucked away tho so time will tell.
It's 3 layers of Kev and that gives about 1mm wall. Does it fit the caps ok? i can get caps in Ti but aint sure if it will weld at home, once i get the garage up (2 weeks) i can start work properly. Ive got a load of kevlar fairing panels to vacuum for my GSXR4 and i will sort the cans with no marks, plus i will have the lathe back running so can start to machine stuff again.
Tony,the bike's looking REAL NICE! hope i can get the GSXR 1/4 as good, ive a few special parts tucked away tho so time will tell.
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
Well the PVM's have gone and have been replaced with a mint set of standard rims until such time i can source some magteks.
Some might think im mad but i prefer the standard look over the 3 spokes its just the weight of em i dont like, i havent rode it yet but even with my lame riding skills im sure im gunna notice the difference over the super light PVM's It did gain some nice braking wave discs in the swap over tho
Some might think im mad but i prefer the standard look over the 3 spokes its just the weight of em i dont like, i havent rode it yet but even with my lame riding skills im sure im gunna notice the difference over the super light PVM's It did gain some nice braking wave discs in the swap over tho
-
- Site Supporter
- Reactions:
- Posts: 903
- Joined: Thu Feb 03, 2011 5:33 pm
- Bike owned: nsr ,cagiva mito , vfr 400 R3L
- Location: portsmouth
Re: RVF Endurance AM-PM Replica build
looks mint mate, love the cans too. are you leaving it white or doing the AM-PM jobby!?
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
Staying white for the meantime mate, i want to get a nose cone complete with mid panels for when i do the am-pm rep
-
- Site Supporter
- Reactions:
- Posts: 903
- Joined: Thu Feb 03, 2011 5:33 pm
- Bike owned: nsr ,cagiva mito , vfr 400 R3L
- Location: portsmouth
Re: RVF Endurance AM-PM Replica build
ah fair do s. those the sp1 pipes same as mark had up for sale while back? he wanted 700 notes for those, was so tempted. look ace once its all painted up this one.
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
Na those are TSR Titainium jobbies :), i sold my old SP1 system for about £350 i think
-
- Site Supporter
- Reactions:
- Posts: 903
- Joined: Thu Feb 03, 2011 5:33 pm
- Bike owned: nsr ,cagiva mito , vfr 400 R3L
- Location: portsmouth
Re: RVF Endurance AM-PM Replica build
did you!? someone got a bargin,maybe his ones were a little dear then.... those tit ones look dam good too.
now go and ride her, interested to hear the results mate.
now go and ride her, interested to hear the results mate.
- Deviant400
- Site Supporter
- Reactions:
- Posts: 769
- Joined: Sat Sep 05, 2009 12:50 pm
- Bike owned: NC30, Kona Cowan
- Location: Trowbridge
Re: RVF Endurance AM-PM Replica build
tony are the black number boards on the seat paint or vinyl , if there vinyl where did you get um , im after a pair
Deviants AM/PM buildxivlia wrote:no i am not dead. ive just been trying a few things....
viewtopic.php?f=62&t=27307
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF Endurance AM-PM Replica build
No i painted them on, imageworks do vinyl ones for the seat unitDeviant400 wrote:tony are the black number boards on the seat paint or vinyl , if there vinyl where did you get um , im after a pair
- Deviant400
- Site Supporter
- Reactions:
- Posts: 769
- Joined: Sat Sep 05, 2009 12:50 pm
- Bike owned: NC30, Kona Cowan
- Location: Trowbridge
Re: RVF Endurance AM-PM Replica build
cheers chap , iv mailed them a request
Deviants AM/PM buildxivlia wrote:no i am not dead. ive just been trying a few things....
viewtopic.php?f=62&t=27307