1990 SP - Valve Clearances

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
bluesmokeracer
Settled in member
Reactions:
Posts: 21
Joined: Sat Jul 21, 2018 8:19 am
1990 SP - Valve Clearances

Post by bluesmokeracer » Sun Apr 19, 2020 9:22 am

Hi All,

Can anyone confirm whether the 1990 GK76A SP valve clearances differ from the non-SP models?

Thx

BSR
Top
moforockband
Familiar Member
Reactions:
Posts: 388
Joined: Wed Jun 03, 2015 9:41 am
Bike owned: GK73a SP CRM250 mk3
Re: 1990 SP - Valve Clearances

Post by moforockband » Sun Apr 19, 2020 10:57 am

I'm pretty sure (not 100%) they all use the same camshaft, and will use the same clearance. If you have to adjust any, set them on the looser side as shim under buckets usually tighten up over time.
Top
bluesmokeracer
Settled in member
Reactions:
Posts: 21
Joined: Sat Jul 21, 2018 8:19 am
Re: 1990 SP - Valve Clearances

Post by bluesmokeracer » Sun Apr 19, 2020 6:10 pm

Many thanks
BSR
Top
Post Reply

Return to “Suzuki - Workshop”