Hey everyone,
New to this side of the garage in 400 terms! Good to be here!
A friend of mine has just picked up a 76A for a track bike, was not running because of various idiots working on the bike, now it runs well but we have the rattle that I assume is the cam chain tensioner, is there a manual one that fits the bike for sure? Or does the guy that was selling the manual ones still sell and post to NZ?
Also not sure what year the bike is but it has right way up forks, how do you tell if they are the low power or full 59hp bikes?
Thanks in advance!
Neil
Cam Chain/ Bike specs GK76A
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neil22
- Settled in member
- Posts: 28
- Joined: Fri Jan 10, 2014 11:34 pm
- Bike owned: NC30x3 RG500 GSXR1100 03 Busa
- Location: New Zealand
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Cam Chain/ Bike specs GK76A
hi Neil and welcome to the dark side.
The 76 only came with USD forks so if it is definitely a 76 with the cradle type frame then the front end is not stock.
If you can post up the part number off the cdi I can tell you of its 53hp.
APE do a manual tensioner and srad600 fits the 400, any big bore turbo shop will sell them.
I can also help you with the speed restriction if you want.
The 76 only came with USD forks so if it is definitely a 76 with the cradle type frame then the front end is not stock.
If you can post up the part number off the cdi I can tell you of its 53hp.
APE do a manual tensioner and srad600 fits the 400, any big bore turbo shop will sell them.
I can also help you with the speed restriction if you want.
-
Neil22
- Settled in member
- Posts: 28
- Joined: Fri Jan 10, 2014 11:34 pm
- Bike owned: NC30x3 RG500 GSXR1100 03 Busa
- Location: New Zealand
Re: Cam Chain/ Bike specs GK76A
Variablevalves suck wrote:hi Neil and welcome to the dark side.
The 76 only came with USD forks so if it is definitely a 76 with the cradle type frame then the front end is not stock.
If you can post up the part number off the cdi I can tell you of its 53hp.
APE do a manual tensioner and srad600 fits the 400, any big bore turbo shop will sell them.
I can also help you with the speed restriction if you want.
Awesome thank you for that, I will be in touch.
Cheers