I bought a bandit 400 a couple of weeks ago and it started and ran fine, one morning would not start. Bought a new ignition pulser and ran fine after that.
Problem is was out riding, everything working fine when suddenly engine just cut out, and had to roll to a stop. Now it will not start, won't even turn over. Any ideas any one?
Bandit not starting
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 50
- Joined: Thu Aug 11, 2011 1:53 am
- Bike owned: Derbi Senda
Re: Bandit not starting
Check your stand switch is working, or try to bypass it and see if it will start. Will it bump start?
-
- Settled in member
- Posts: 4
- Joined: Fri Oct 03, 2014 7:57 pm
Re: Bandit not starting
dose the starter motor work if not might be starter solinoid
-
- Settled in member
- Posts: 7
- Joined: Sun Nov 02, 2014 12:30 pm
- Bike owned: suzuki Bandit 400VS
Re: Bandit not starting
My bike has a similar issue, but someone told me that most Suzuki's have a key ignition issue. So try this, when turning the key, wiggle and jiggle the key, sometime the ignition is a bit broken. 
