Valve Clearances
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
blagger
- Settled in member
- Reactions:
- Posts: 44
- Joined: Wed Apr 30, 2008 7:40 pm
Valve Clearances
gk73a
.13-.18mm intake and .20-.25 exhaust
This is probably one for jay....
over the next week i am going to adjust a valves again. whats a good mark to adjust them to between those ranges. for example... for the intake would u go half way between .13 and .18 and do say .15 or would you adjust them to the .13 or close to it..
what would you recommend?
:)
.13-.18mm intake and .20-.25 exhaust
This is probably one for jay....
over the next week i am going to adjust a valves again. whats a good mark to adjust them to between those ranges. for example... for the intake would u go half way between .13 and .18 and do say .15 or would you adjust them to the .13 or close to it..
what would you recommend?
:)
-
M1KE
- Settled in member
- Reactions:
- Posts: 141
- Joined: Fri May 02, 2008 6:45 pm
Re: Valve Clearances
Set them to the widest as they close up over time.