Lets try again!!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
Progress report;
Motor finally on the bench being built by Mark`skinny`White of PB fame. About time too i tell ya!
Sp box;
Motor is now built(short motor) barrels/piston`s tomorrow....
Basic spec has changed a little due to money/circumstances. Now running the standard crank/clutch,stock barrels new rings/sp box/sv650 manual cam chain adjuster(ape) new valve seats standard valves and a little cleaning/tidying of the ports,Inlets matched throughout and of course the vm`s....
More pics info tomorrow when work continues............
Andy
Motor finally on the bench being built by Mark`skinny`White of PB fame. About time too i tell ya!
Sp box;
Motor is now built(short motor) barrels/piston`s tomorrow....
Basic spec has changed a little due to money/circumstances. Now running the standard crank/clutch,stock barrels new rings/sp box/sv650 manual cam chain adjuster(ape) new valve seats standard valves and a little cleaning/tidying of the ports,Inlets matched throughout and of course the vm`s....
More pics info tomorrow when work continues............
Andy
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
Hey,
Cases together now(look`s good too) also pistons/barrel on as well but forgot to take pic so next post...
True to form i`m short of some part`s but i`m sure they will turn up when i turn the workshop upside down!
Andy
Cases together now(look`s good too) also pistons/barrel on as well but forgot to take pic so next post...
True to form i`m short of some part`s but i`m sure they will turn up when i turn the workshop upside down!
Andy
-
- Familiar Member
- Reactions:
- Posts: 287
- Joined: Thu Sep 08, 2011 5:27 pm
Re: Lets try again!!
Looking really nice, wish i could afford to do a proper rebuilt like that, new shells ect, nice :)
excited to see the end product of this referb.
excited to see the end product of this referb.
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
Progress........
Head finally complete after sourcing new inlets from Japan(how expensive!) due to not having a complete set that where any good in my now vast collection.All spacer`s(due to flatslides) and inlet rubbers matched/numbered and some head work by Mark.General tidying up of cast marks etc and a little extra on the exhaust side.
Photobucket being a pain at the moment so will post later......
Andy
Head finally complete after sourcing new inlets from Japan(how expensive!) due to not having a complete set that where any good in my now vast collection.All spacer`s(due to flatslides) and inlet rubbers matched/numbered and some head work by Mark.General tidying up of cast marks etc and a little extra on the exhaust side.
Photobucket being a pain at the moment so will post later......
Andy
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
Hey,finally got photobucket to play ball............
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
Hey,
Progress report so far.....
Motor completed tonight (about an hour ago!) and ready to install,only a few thing`s left to do like sorting all the stainless bolt`s for the cases/sump etc but should only take about an hour or so tomorrow and then fit it into the frame at last.....................
Of course everything want`s wiping down and re polishing but i dont mind i`m just glad i`ve got the thing back.....
Happy,happy,
Andy
Progress report so far.....
Motor completed tonight (about an hour ago!) and ready to install,only a few thing`s left to do like sorting all the stainless bolt`s for the cases/sump etc but should only take about an hour or so tomorrow and then fit it into the frame at last.....................
Of course everything want`s wiping down and re polishing but i dont mind i`m just glad i`ve got the thing back.....
Happy,happy,
Andy
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
Further progress.....
Put the motor back in this morning and this has thrown up one or two problems,chiefly the clearance between the radiator and front pipes due to their size. Nothing that can`t be sorted though.......
Starting to look like a bike for a change,more as and when.......
Andy
Put the motor back in this morning and this has thrown up one or two problems,chiefly the clearance between the radiator and front pipes due to their size. Nothing that can`t be sorted though.......
Starting to look like a bike for a change,more as and when.......
Andy
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
Mmmmmmmm,
Upon realizing that neutral should not live between third and fourth and my comment of `it will have to be stripped again` ,this is the response i received from my `mate` Mark.......
On the plus side the exhaust is finished,tyre`s are fitted (rosso supercorsa`s) and the wiring will be done soon(another mate,got lots of em!).
Not quite as happy as normal,
Andy
Upon realizing that neutral should not live between third and fourth and my comment of `it will have to be stripped again` ,this is the response i received from my `mate` Mark.......
On the plus side the exhaust is finished,tyre`s are fitted (rosso supercorsa`s) and the wiring will be done soon(another mate,got lots of em!).
Not quite as happy as normal,
Andy
-
- Settled in member
- Reactions:
- Posts: 193
- Joined: Fri Mar 20, 2009 6:55 pm
- Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
- Location: Lincolshire
Re: Lets try again!!
http://youtu.be/43747IbzAds
First run,some problems but hey i didnt expect everything to go smoothly.......
System and can are as loud as f*ck so will be interesting trying to meet the noise limit on the first track-day it attends,still load`s to do(or it seems that way) all small annoying stuff but i can see the light at the end of the tunnel now..............
Andy
First run,some problems but hey i didnt expect everything to go smoothly.......
System and can are as loud as f*ck so will be interesting trying to meet the noise limit on the first track-day it attends,still load`s to do(or it seems that way) all small annoying stuff but i can see the light at the end of the tunnel now..............
Andy
-
- Settled in member
- Reactions:
- Posts: 85
- Joined: Fri Jun 19, 2015 6:14 am
Re: Lets try again!!
ANy finished photos?