R1 fork conversion GSXR (gk76a)

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Reactions:
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: R1 fork conversion GSXR (gk76a)

Post by Variablevalves suck » Mon Oct 19, 2009 9:42 pm

VERY NICE work Andy :clap:
If you fit the R6 fotks can you do a dog a faver and post me the distance between each fork leg center as they are mounted in the yoke. I got thundercat in my B4 and using the stock Suzi yoke the forks are held slightly closer together than they should be and the calipers run very close to the spoke of the wheel, so if the R6 measures up alittle wider i may get some.
Many thanks Chris.

Andy
Settled in member
Reactions:
Posts: 163
Joined: Fri Mar 20, 2009 6:55 pm
Bike owned: R1x2 98/2k/Gp125/73a/76a/76a
Location: Lincolshire
Re: R1 fork conversion GSXR (gk76a)

Post by Andy » Tue Oct 20, 2009 5:42 pm

Variablevalves suck wrote:VERY NICE work Andy :clap:
If you fit the R6 fotks can you do a dog a faver and post me the distance between each fork leg center as they are mounted in the yoke. I got thundercat in my B4 and using the stock Suzi yoke the forks are held slightly closer together than they should be and the calipers run very close to the spoke of the wheel, so if the R6 measures up alittle wider i may get some.
Many thanks Chris.
Hey Chris,
As near as i can be the measurement your after is 160mm.That`s between the the fork end`s(spindle) and the same measurement between the fork`s right up at the bottom of the bottom yoke,hope that`s where you mean mate.....

Andy :grin:

User avatar
Variablevalves suck
Site Supporter
Site Supporter
Reactions:
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: R1 fork conversion GSXR (gk76a)

Post by Variablevalves suck » Thu Oct 22, 2009 7:00 pm

Cheers for that :peace:

500build
Settled in member
Reactions:
Posts: 3
Joined: Thu Mar 04, 2021 7:36 pm
Re: R1 fork conversion GSXR (gk76a)

Post by 500build » Thu Mar 04, 2021 7:52 pm

Nice work., I'm thinking of doing the same with the big bang front end , but I'm having billet yokes made., as its going to be a one off build with a nc24 swingarm and a t500 stroker engine

500build
Settled in member
Reactions:
Posts: 3
Joined: Thu Mar 04, 2021 7:36 pm
Re: R1 fork conversion GSXR (gk76a)

Post by 500build » Thu Mar 04, 2021 8:21 pm

Nice job I'm doing the same to my build
Gsxr400r frame
T500 engine
Nc24.swingarm
Vfr750.rear.wheel


Post Reply