Cutting out gsxr 400 88

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
lukesty
Settled in member
Reactions:
Posts: 13
Joined: Tue Oct 11, 2016 9:06 pm
Cutting out gsxr 400 88

Post by lukesty » Mon Oct 17, 2016 7:11 pm

Hi there I went out on my bike gave it a real good run and it was running really well and then it just died on me the bike was warm it doesn't run hot as it sits at a quarter on the gauge.[DISAPPOINTED FACE] I had a full tank of fuel. I didn't lose any ignition. Then when I tried to start it it wouldn't fire up at all the starter motor was going but nothing. But then I left it for half an hour and then it started and run fine for 10 minutes then it died again and would not start. And I had to push it home and it would not start at all. But today it started first time strange. Could it be electrical problem when warm or do u think fuel.? Any one had this thanks Luke.


Sent from my HTC One A9 using Tapatalk

lukesty
Settled in member
Reactions:
Posts: 13
Joined: Tue Oct 11, 2016 9:06 pm
Re: Cutting out gsxr 400 88

Post by lukesty » Wed Oct 19, 2016 8:04 am

I'm thinking maybe coils ?

Sent from my HTC One A9 using Tapatalk

moforockband
Familiar Member
Reactions:
Posts: 388
Joined: Wed Jun 03, 2015 9:41 am
Bike owned: GK73a SP CRM250 mk3
Re: Cutting out gsxr 400 88

Post by moforockband » Wed Nov 16, 2016 9:50 pm

Sidestand switch or pulse coil lh side engine.

sorry late reply.

ventYl
Settled in member
Reactions:
Posts: 44
Joined: Sat Sep 05, 2015 1:02 pm
Bike owned: GSF 400 Bandit
Re: Cutting out gsxr 400 88

Post by ventYl » Sun Dec 25, 2016 2:12 pm

i would vote for fuel supply problems. Something like clogged tank filter or any auxiliary filter or something similar.

lukesty
Settled in member
Reactions:
Posts: 13
Joined: Tue Oct 11, 2016 9:06 pm
Re: Cutting out gsxr 400 88

Post by lukesty » Tue May 21, 2019 4:06 pm

Turns out it was the rectifier

Sent from my FIG-LX1 using Tapatalk



Post Reply