Another 400
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
-
- Settled in member
- Reactions:
- Posts: 124
- Joined: Mon Sep 16, 2013 4:12 pm
- Bike owned: GK76a GSXR400R & TZR250RS
- Location: Fife, Scotland
Re: Another 400
Welcome back, Si. Have you collected it yet? Good luck with it, I hope you have less hassle wi' this one!
What are you planning to do to it? Are you gonna give it a service & a good check over before the spring?
I haven't been out on your old one much as the carb's still need fine tuning & rebalanced. I have new OEM needle's & needle jets to fit as well. Hopefully see you out & about later in the year.
What are you planning to do to it? Are you gonna give it a service & a good check over before the spring?
I haven't been out on your old one much as the carb's still need fine tuning & rebalanced. I have new OEM needle's & needle jets to fit as well. Hopefully see you out & about later in the year.
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 2608
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Another 400
Seems to be a few 76's up your way
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
-
- Settled in member
- Reactions:
- Posts: 124
- Joined: Mon Sep 16, 2013 4:12 pm
- Bike owned: GK76a GSXR400R & TZR250RS
- Location: Fife, Scotland
Re: Another 400
I never see GSXR 400,s either. ZXR 4,s, NC30,s & the odd 3TJ FZR & NC29 CBR are all I ever see.
The rarity value was one of the reasons I bought 4hundread,s GK76 off him.
The rarity value was one of the reasons I bought 4hundread,s GK76 off him.
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee
-
- Settled in member
- Reactions:
- Posts: 61
- Joined: Fri Aug 07, 2015 12:09 pm
- Bike owned: '94 GSXR400, '14 CBR300
- Location: Southland, New Zealand
Re: Another 400
Looking good there. Hey did you have any clearance issues when you fit the K9 rear shock?4hundread wrote:Been a wee while since I got this but here is where we are at now.
Passed the MOT in mid june and after another wee blast tonight have done 1900kms. Hasn't missed a beat.
I have done the obligatory k9 rear shock conversion, added sandy stainless downpipes ( if I had paid full price I wouldn't have been best impressed), stick coils and service. Ditched the horrible purple screen and sorted out a pair of mirrors. Already had EBC discs and a KN filter and new Michelins on when I got it.
New bearing all through and got the rear wheel redone white as the plan was to change it to blue and white as I couldn't find the black/pink/purple panels. As usual after getting it done the original colours turn up! I like the shellsuit colours and am fairly pleased with the condition of them.
So with winter looming I have a litetek full kit for the carbs and new genuine needles to do and it will be wheels off and get them both done the correct blue/purple colour, tank sprayed and then, hopefully only filling the holes in the fuelling will remain.
Sent from my SM-A510F using Tapatalk
Have just fitted a K7 to my GK76a and I had to attack the front of the swing arm cross member with the die grinder as the outer diameter of the spring was contacting it under compression.
- 4hundread
- Site Supporter
- Reactions:
- Posts: 286
- Joined: Sat Apr 03, 2010 8:03 pm
- Bike owned: 91 GSXR 400
- Location: Dundee