piston rings for gsxr 400 gk76a
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 75
- Joined: Mon Jan 05, 2015 6:13 pm
- Bike owned: honda 600rr / z200/honda horne
- Location: manchester LOWTON
piston rings for gsxr 400 gk76a
any one know where i can buy them
got some from china perfect fit exept for top and second ring thickness r .081 inch should be .090 inch
been everywhere trying to find some NOTE some of these rings i find out have different thickness and oil scraper different depends on what market it was made for can u belive that this is mostly the oil rings though .
therwise its someone who has a big bore kit going cheap
got some from china perfect fit exept for top and second ring thickness r .081 inch should be .090 inch
been everywhere trying to find some NOTE some of these rings i find out have different thickness and oil scraper different depends on what market it was made for can u belive that this is mostly the oil rings though .
therwise its someone who has a big bore kit going cheap
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 2608
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: piston rings for gsxr 400 gk76a
if you google the part number you will find a number of suppliers, think they are around £54 a set in the UK so not cheap.
-
- Settled in member
- Reactions:
- Posts: 75
- Joined: Mon Jan 05, 2015 6:13 pm
- Bike owned: honda 600rr / z200/honda horne
- Location: manchester LOWTON
Re: piston rings for gsxr 400 gk76a
THANKS I WILL LOOK FOR PART NO ON THE INFO PAGE AND TRY A GOOGLE THEY R RARER THAN HENS TEETH THESE got some from china alibaba but not correct width in boreVariablevalves suck wrote:if you google the part number you will find a number of suppliers, think they are around £54 a set in the UK so not cheap.
-
- NWAA Supporter
- Reactions:
- Posts: 1226
- Joined: Fri May 02, 2008 8:06 pm
- Bike owned: 3TJRRSP TRX850 XV750 cafe
- Location: Hertfordshire
Re: piston rings for gsxr 400 gk76a
I got a set from a shop on Harrow Road near White City, not cheap though......
Spares direct 020 89683765.
Spares direct 020 89683765.
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 2608
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: piston rings for gsxr 400 gk76a
Robinsons Suzuki are probably the best place to try, must bike shops use them for their supplies.
-
- Settled in member
- Reactions:
- Posts: 75
- Joined: Mon Jan 05, 2015 6:13 pm
- Bike owned: honda 600rr / z200/honda horne
- Location: manchester LOWTON
Re: piston rings for gsxr 400 gk76a
robinsons rings r 250 quid put them back on the shelf mate