rear wheel spacer

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Tbone1980uk
Settled in member
Reactions:
Posts: 4
Joined: Sat Mar 22, 2014 9:48 pm
Bike owned: Gsxr400 gk76a Vfr400 nc30
Location: Bristol
rear wheel spacer

Post by Tbone1980uk » Thu Apr 17, 2014 6:34 pm

hi can anyone tell me what is the right way round for rear spindle spacer sprocket side because one side has slight gap many thanks mark

User avatar
Awynn
Site Supporter
Site Supporter
Reactions:
Posts: 193
Joined: Fri May 02, 2008 10:02 pm
Bike owned: GK73a, CB250, NS125R-K, CLR125
Location: Rugby, UK
Re: rear wheel spacer

Post by Awynn » Fri Apr 18, 2014 2:04 am

Lets start with what bike seeing as you do not have any info in your profile......

Tbone1980uk
Settled in member
Reactions:
Posts: 4
Joined: Sat Mar 22, 2014 9:48 pm
Bike owned: Gsxr400 gk76a Vfr400 nc30
Location: Bristol
Re: rear wheel spacer

Post by Tbone1980uk » Fri Apr 18, 2014 7:19 am

gsxr400 gk76a cheers

donk
Site Supporter
Site Supporter
Reactions:
Posts: 176
Joined: Tue Jun 01, 2010 8:48 pm
Bike owned: Gk76a x2
Location: worcester
Re: rear wheel spacer

Post by donk » Fri Apr 18, 2014 7:30 pm

I'm not near the bike at the moment but from what I can remember the spacer slots in the bearing seal on the sprocket carrier with the larger face of the spacer facing out

Tbone1980uk
Settled in member
Reactions:
Posts: 4
Joined: Sat Mar 22, 2014 9:48 pm
Bike owned: Gsxr400 gk76a Vfr400 nc30
Location: Bristol
Re: rear wheel spacer

Post by Tbone1980uk » Sat Apr 19, 2014 1:41 pm

cheers donk much appreciated indeed !!!!!!!!!!!!!!!!!!!!!!!!! :grin:


Post Reply