No key - remove ignition
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- One Hit Wonder
- Reactions:
- Posts: 1
- Joined: Fri Jun 06, 2008 8:29 am
No key - remove ignition
Hello! I know this is my first post and it might sound suspicious.
Me and my girlfriend are on a track event vacation and she took the wrong key with her for her ZXR 400 bike.
I wonder if someone here please can help me out and point to which cables on the ignition wire loom that I should hook up to what.
I can do the job, I just don't know what connects to what and I rather not make a mess of it all. I can take a guess that 5 of the wires should hook up to eachother and the red cable (plus to battery) should be the decider if the bike turns on. I've bought a switch already to set things up.
Appreciate any help!
There are 2 plus cables that goes to the battery plus. And there is one cable that is semi-ground with around 6 volts when connected to the two plus cables going to the battery.
The rest are smaller cables that I guess goes to P (parking) and other stuff such as lights.
I can get the ignition to go on, but upon pressing the starter the starter runs but the bike won't fire up. And I bet that has to do with the spark plugs not getting any juice from the batteri.
Me and my girlfriend are on a track event vacation and she took the wrong key with her for her ZXR 400 bike.
I wonder if someone here please can help me out and point to which cables on the ignition wire loom that I should hook up to what.
I can do the job, I just don't know what connects to what and I rather not make a mess of it all. I can take a guess that 5 of the wires should hook up to eachother and the red cable (plus to battery) should be the decider if the bike turns on. I've bought a switch already to set things up.
Appreciate any help!
There are 2 plus cables that goes to the battery plus. And there is one cable that is semi-ground with around 6 volts when connected to the two plus cables going to the battery.
The rest are smaller cables that I guess goes to P (parking) and other stuff such as lights.
I can get the ignition to go on, but upon pressing the starter the starter runs but the bike won't fire up. And I bet that has to do with the spark plugs not getting any juice from the batteri.
-
- Settled in member
- Reactions:
- Posts: 57
- Joined: Fri May 02, 2008 9:11 pm
- Location: Cheshire
- Contact:
Re: No key - remove ignition
what model zxr have you got ?
if its the newer one you will need to connect a resistor to the grey wire back to the coil the other side of this is looking for +ve just chek first what model you have and what cdi you are using as you will also need to deristrict the box if it isnt a uk spec bike.
if its the newer one you will need to connect a resistor to the grey wire back to the coil the other side of this is looking for +ve just chek first what model you have and what cdi you are using as you will also need to deristrict the box if it isnt a uk spec bike.
-
- One Hit Wonder
- Reactions:
- Posts: 1
- Joined: Tue May 06, 2008 3:23 pm
Re: No key - remove ignition
The grey wire goes to the cdi not the coil. It can be spurred off the 12volt live(usually brown)feed to the cdi with a 100 ohm resistor in line which brings it down to around 9 volts (anti theft device) Also join the black/green from the cdi to earth (lock out switch) earths are black/yellow. That should get you running.