FZR400 1WG 1987 Fairings

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
greeny_3
Settled in member
Reactions:
Posts: 11
Joined: Thu May 29, 2008 5:08 pm
FZR400 1WG 1987 Fairings

Post by greeny_3 » Thu May 29, 2008 5:11 pm

FZR400 1WG 1987

I have the above bike, and need some new fairings for it. Does anyone know if fairings off of other models will fit, ie off a newer 400 or off of any 600's?

Thanks in advance,

Dave

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9490
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: FZR400 1WG 1987 Fairings

Post by Evilchicken0 » Thu May 29, 2008 6:55 pm

That's a Genesis isn't it ???
If it has the split fairings then FZ600 should fit and retain the split
FZR600 and FZR400 1WG should also fit but I can't garantee it - these are one piece

Get some plastec as you will probably have to repair whatever you find to some degree

greeny_3
Settled in member
Reactions:
Posts: 11
Joined: Thu May 29, 2008 5:08 pm
Re: FZR400 1WG 1987 Fairings

Post by greeny_3 » Thu May 29, 2008 10:51 pm

It's this one...

http://s127.photobucket.com/albums/p123 ... C_0032.jpg

So just to make it totally idiot proof for me, could you list which models would be a direct fit, and what years up to?

Thanks :)

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9490
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: FZR400 1WG 1987 Fairings

Post by Evilchicken0 » Thu May 29, 2008 11:01 pm

Fzr400 1WG 1987
FZ600 around 1986 to 88


But the fairing on that bike looks good.

greeny_3
Settled in member
Reactions:
Posts: 11
Joined: Thu May 29, 2008 5:08 pm
Re: FZR400 1WG 1987 Fairings

Post by greeny_3 » Fri May 30, 2008 11:46 am

Great stuff, widens my options a little.

Oh yeh I like the colour scheme on it, and I'll keep it the same. But if you get up close you can see how bad it is, and it's like it all over. And I have one missing too!

Thanks for your help

greeny_3
Settled in member
Reactions:
Posts: 11
Joined: Thu May 29, 2008 5:08 pm
Re: FZR400 1WG 1987 Fairings

Post by greeny_3 » Sun Jun 08, 2008 8:36 pm

I've seen that there are two styles of tail section; a 1 piece one that I've got, and then a 3 piece one that slots together. Would the 3 piece one fit my bike?

Thanks,

Dave

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9490
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: FZR400 1WG 1987 Fairings

Post by Evilchicken0 » Sun Jun 08, 2008 9:15 pm

Um ... maybe ... tail sections bolt to subframes which may or may not bolt on to your bike, I'd have to say that it probably won't. It's best to try and get one that's a replacement for your bike.

If the panels are cracked then you can try to repair them with Plastex


Post Reply