R6tacho conversion
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 8
- Joined: Thu Oct 18, 2018 7:55 am
R6tacho conversion
Hi evil it’s the original thunder cat tci. and yes the tps is connected I don’t know what the previous owner has or has not done to it I am flying blind as there are not many thunder cats here in Australia some one suggested that it may need a diode between the tachometer wire from the tci igniter unit and the tachometer it’s self I’ll give it a try it can’t hurt
It’s about the only thing I haven’t done I know the r6 tachometer and speedo works as I have a 3en1with a 3he 600 motor fitted but the loom on the thunder at is a fair bit diffent
It’s about the only thing I haven’t done I know the r6 tachometer and speedo works as I have a 3en1with a 3he 600 motor fitted but the loom on the thunder at is a fair bit diffent
-
- Site Supporter
- Reactions:
- Posts: 9490
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: R6tacho conversion
Hmmm ... see how it goes. I'm doing a similar conversion but used the 4JH cdi so I didnt need the TPS .
-
- Site Supporter
- Reactions:
- Posts: 581
- Joined: Tue Aug 16, 2011 3:10 pm
- Bike owned: MC22, 3TJ1
- Location: Thailand
- Contact:
Re: R6tacho conversion
To fit an R6 to my 400 I needed a divide-by-two gizmo see here https://litetek.co/R4/Guide_R4_InstrumentCluster.html
Carb seal kits in viton & other parts
https://litetek.co
https://litetek.co