3EN1 Front Brake Rotors
Posted: Wed Dec 05, 2018 1:06 am
Hi all,
It's been a while. Hope all of you are doing well. I have an issue with my front brake rotors I hope I can get some help with. So the bike is a 3EN1. I recently replaced the front brake rotors with EBCs. Problem is I now get a lot of pulsing and vibration under moderate to hard braking. I put the old rotors back on and they are fine so that eliminates head bearings or some other issue. I noticed that the old rotors do "float" quite a bit on their buttons/bobbins. The EBCs are as stiff as a teenage boy staring at MotoGP Umbrella girls. Even though they have a spring washer and are supposedly "floating" they do not budge. I suspect this is why I am getting the pulsing/vibration.
I could ditch the EBCs but OEM rotors are unobtainium. I thought about FZR600 rotors but they are a different P/N so I suspect they will not work. Any ideas?
It's been a while. Hope all of you are doing well. I have an issue with my front brake rotors I hope I can get some help with. So the bike is a 3EN1. I recently replaced the front brake rotors with EBCs. Problem is I now get a lot of pulsing and vibration under moderate to hard braking. I put the old rotors back on and they are fine so that eliminates head bearings or some other issue. I noticed that the old rotors do "float" quite a bit on their buttons/bobbins. The EBCs are as stiff as a teenage boy staring at MotoGP Umbrella girls. Even though they have a spring washer and are supposedly "floating" they do not budge. I suspect this is why I am getting the pulsing/vibration.
I could ditch the EBCs but OEM rotors are unobtainium. I thought about FZR600 rotors but they are a different P/N so I suspect they will not work. Any ideas?