How to fit the 600 into the 3tj

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
willandrip
Site Supporter
Site Supporter
Reactions:
Posts: 1223
Joined: Sun Aug 14, 2011 8:33 am
Bike owned: Far, far too many now
Location: North Tyneside Tyne and Wear
Re: How to fit the 600 into the 3tj

Post by willandrip » Tue Mar 11, 2014 4:31 pm

I think Evil made a typo; 600 series chain is tractor spec.
I reckon he means 520; which with good quality chain will be ample and much lighter than 530.
530 chain and sprockets will weigh nearly twice as much as 520 and will rob a lot of power on a 600.
A red box doth not a Snap On make.

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9468
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: How to fit the 600 into the 3tj

Post by Evilchicken0 » Tue Mar 11, 2014 5:35 pm

I thought the 600 used a 520 ???

Anyway - go with the 520 spec

willandrip
Site Supporter
Site Supporter
Reactions:
Posts: 1223
Joined: Sun Aug 14, 2011 8:33 am
Bike owned: Far, far too many now
Location: North Tyneside Tyne and Wear
Re: How to fit the 600 into the 3tj

Post by willandrip » Tue Mar 11, 2014 5:40 pm

It does ; you stated use 620 which is Busa territory !
A red box doth not a Snap On make.

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9468
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: How to fit the 600 into the 3tj

Post by Evilchicken0 » Tue Mar 11, 2014 7:45 pm

Oops !!!
Anyway, doesn't Kayla supply C+S kits ???

Yamahafreak
Settled in member
Reactions:
Posts: 6
Joined: Mon Feb 17, 2014 1:50 pm
Re: How to fit the 600 into the 3tj

Post by Yamahafreak » Fri Apr 04, 2014 5:42 pm

so i am running into a little problem with the wires,

got it almost all figured out expect for the key switch,the 400rr has 4 wires coming out and the yzf 600 loom has 6 wires going to the key switch. How can i connect that so it all works?

also does the YZF600r have a manual spare fuel switch?

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9468
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: How to fit the 600 into the 3tj

Post by Evilchicken0 » Fri Apr 04, 2014 9:06 pm

There's wiring diagrams in the document library of this site, the link is up at the very top of the page. Choose the wires and splice them together

Yamahafreak
Settled in member
Reactions:
Posts: 6
Joined: Mon Feb 17, 2014 1:50 pm
Re: How to fit the 600 into the 3tj

Post by Yamahafreak » Fri Apr 04, 2014 10:00 pm

tnx for the help :)
But i still don't see the wires i need to connect. even a mate of mine that is a car electrician doesn't see.
the 600R wires are ok we know what what is but on the 400r there is this one wire we just can not find it (blue with a red line)

Just did a order on a 600r keys witch, things left to do. exhoust, tires, and the key switch.
almost ready.

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9468
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: How to fit the 600 into the 3tj

Post by Evilchicken0 » Sat Apr 05, 2014 10:07 am

You can build the two switches together fairly easily if you want to still use the original key

Yamahafreak
Settled in member
Reactions:
Posts: 6
Joined: Mon Feb 17, 2014 1:50 pm
Re: How to fit the 600 into the 3tj

Post by Yamahafreak » Mon Dec 01, 2014 11:26 am

Got the bike up and running.
100bhp on the dyno.
http://youtu.be/DD2KVC2Kc5s
FZR600r engine
thundercat carbs with TPS
thundercat loom with everything from the thundercat.

maybe not the correct area to post this.
A week later I put on my fairings to go out for a quick spin, and even before I could get out of my street where I live, I got hit by a car in back, car did a hit and run. I broke my back in 2 spots, still walking :). and ill have a 99% recovery. trying to find all the parts for the bike now that got destroyed or damaged.
Anyone have a top fairing piece as that one got almost completely destroyed when the bike hit the asphalt and a subframe.

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9468
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: How to fit the 600 into the 3tj

Post by Evilchicken0 » Mon Dec 01, 2014 2:00 pm

Fack !!!!


Post Reply