Bike in a box

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Wraith
Settled in member
Reactions:
Posts: 118
Joined: Tue May 20, 2008 9:11 am
Location: Washington. Tyne & Wear.
Bike in a box

Post by Wraith » Sun Jun 22, 2008 1:51 am

Got a whole bike in boxes last Monday and have put most of it together without a manual

There are a few things I'm not sure of

Whats this for?

Image



Has anyone got a pic of under the seat of a 3en1, as I need to know where to mount this lot

Got mudgaurd CDI//indicators/Back Light fitted but not wired

Image



This what it looks like so far

Had Wheels and Rear Sub Frame Powder Coated and put some R6 Calipers on as the originals were Fooked

Image

Morespeedvicar
Site Supporter
Site Supporter
Reactions:
Posts: 1269
Joined: Thu May 01, 2008 1:37 am
Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
Location: Grimsby
Re: Bike in a box

Post by Morespeedvicar » Sun Jun 22, 2008 2:29 am

Hi,
the bracket in the top pick is the front mount for the airbox, i think its supposed to have a rubber bung in it but my fzr has never had one in it.
The bike looks good, if i get chance tomorow i'll take a few pics for you.
Cheers
Ian

Wraith
Settled in member
Reactions:
Posts: 118
Joined: Tue May 20, 2008 9:11 am
Location: Washington. Tyne & Wear.
Re: Bike in a box

Post by Wraith » Sun Jun 22, 2008 1:50 pm

That would be great as I need to get it sorted as soon as poss

Cheers

Barry

Morespeedvicar
Site Supporter
Site Supporter
Reactions:
Posts: 1269
Joined: Thu May 01, 2008 1:37 am
Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
Location: Grimsby
Re: Bike in a box

Post by Morespeedvicar » Tue Jun 24, 2008 8:33 pm

Hi sorry i didn't get the pics posted yesterday, heres a few. If you need any more please let me know

Image

Image

Image

Hope it helps
Cheers
Ian

Wraith
Settled in member
Reactions:
Posts: 118
Joined: Tue May 20, 2008 9:11 am
Location: Washington. Tyne & Wear.
Re: Bike in a box

Post by Wraith » Wed Jun 25, 2008 9:43 am

That helps alot Cheers

I was wondering where those two on the outside of the subframe mounted

Wraith
Settled in member
Reactions:
Posts: 118
Joined: Tue May 20, 2008 9:11 am
Location: Washington. Tyne & Wear.
Re: Bike in a box

Post by Wraith » Tue Jul 01, 2008 9:37 pm

Need abit more help :oops:

I have a short cable comming out of the loom between the airbox and the petrol tank at the top of the frame

It has a double connector on the end

Any ideas?

Fzr400Trev
Settled in member
Reactions:
Posts: 49
Joined: Wed Apr 30, 2008 5:00 pm
Bike owned: gsf400, fzr400, zzr600
Location: Market Rasen, Lincolnshire
Contact:
Re: Bike in a box

Post by Fzr400Trev » Tue Jul 01, 2008 11:01 pm

got a pic of it will be more clear on what bit u mean

Marb
Thieving Pikey Twat
Thieving Pikey Twat
Reactions:
Posts: 150
Joined: Thu Jun 12, 2008 12:42 pm
Location: Groningen, the Netherlands
Contact:
Re: Bike in a box

Post by Marb » Tue Jul 01, 2008 11:12 pm

If you mean this and this cabel then it doesnt connect to anyhting. Its for connecting accesories. Alarms and what not..

Wraith
Settled in member
Reactions:
Posts: 118
Joined: Tue May 20, 2008 9:11 am
Location: Washington. Tyne & Wear.
Re: Bike in a box

Post by Wraith » Wed Jul 02, 2008 11:45 am

No it's not that one

This one (Is it for the fuel pump as I had the pump pluged into one under the battery box and the pump started to go nuts when I turned the ignition on)

If so ...got to find out what the other one is for :roll:

http://img300.imageshack.us/img300/1232 ... 103dt2.jpg

http://img385.imageshack.us/img385/8230 ... 104da0.jpg

I hate electrics, can't even check on my other bike as it had a custom loom made

Morespeedvicar
Site Supporter
Site Supporter
Reactions:
Posts: 1269
Joined: Thu May 01, 2008 1:37 am
Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
Location: Grimsby
Re: Bike in a box

Post by Morespeedvicar » Thu Jul 03, 2008 3:47 am

Dunno i been daft but i cant get ya pics to work..............
Cheers
Ian


Post Reply