Have just returned from a day at Cadwell with my new toy - a 600 engined 1WG model.
The main problem I need some advice on is the gearing - the bike pulls so hard it has run out of revs in sixth half way along the straights.
It catches everything up in the bends though and I gave a guy on a CBR600 a good run for his money!
The only mod I've done so far is to fit an R6 rear shock. The front fork seals had packed up by the end but I was going to change the oil anyway...
Anyone out there got any gearing experience?
Thanks in advance.....
Gearing information for FZR400 with 600 engine
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
torpytanktop
- Settled in member
- Posts: 10
- Joined: Sat May 24, 2008 8:00 am
-
oldgreg
- Settled in member
- Posts: 29
- Joined: Thu May 01, 2008 12:19 am
-
torpytanktop
- Settled in member
- Posts: 10
- Joined: Sat May 24, 2008 8:00 am
Re: Gearing information for FZR400 with 600 engine
Ahhh, didn't search the General section.....
Many thanks - that gives me all I need to know!
Many thanks - that gives me all I need to know!