Clutch not working, rattling sound after valve check
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 89
- Joined: Fri May 02, 2008 10:33 am
Re: Clutch not working, rattling sound after valve check
Relay is 86,80€ from Yamaha... So that ticking from it means 'busted'? And what could have caused that?
-
- Settled in member
- Posts: 73
- Joined: Thu Jun 12, 2008 11:09 am
- Bike owned: FZR400RR 600 Hybrid
- Location: Surrey
Re: Clutch not working, rattling sound after valve check
that relay thing you need for your 3TJ, i'm pretty sure i've got one on a spare wiring loom i have. Not a lot of use to me sitting in a box.
I'll check if i get a chance to make it in the garage tonight.
I'll check if i get a chance to make it in the garage tonight.
-
- Settled in member
- Posts: 89
- Joined: Fri May 02, 2008 10:33 am
Re: Clutch not working, rattling sound after valve check
Thanks a lot! Cheers!
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Clutch not working, rattling sound after valve check
Why don't you take the whole loom - that way you won't have to sort out the white wiring - probably some botched attempt to rewire the exup servo or get round the 180kmh restriction
-
- Settled in member
- Posts: 89
- Joined: Fri May 02, 2008 10:33 am
Re: Clutch not working, rattling sound after valve check
Funny thing is there is no 180kmh restriction in portuguese market. The previous owner was a friend and rode it past 200kmh several times. The owner before him bought it new and never messed around with anything on the bike (I know this because we all live 200m from each other and have friends in common). And is it possible to fit a UK loom with my kmh clocks and have no restriction?
-
- Settled in member
- Posts: 73
- Joined: Thu Jun 12, 2008 11:09 am
- Bike owned: FZR400RR 600 Hybrid
- Location: Surrey
Re: Clutch not working, rattling sound after valve check
Just been to have a look in the garage, i've found the loom but no relays attached. dammit. I'll have a better look around over the weekend and see if i can track it down.
As for the fuses on the back, the loom i have in front of me looks different. I take it all of the bottom connections are bridged to the brown wire.
From top left, mirroring your last picture
1 Red /White 2 Brown 3 Red /Orange 4 Red
5 Red /White 6 Brown 7 Red/Orange 8 Red/Yellow
You can have the remains of the loom if its useful. However I've cut some of the connectors off it and used them on the 600.
As for the fuses on the back, the loom i have in front of me looks different. I take it all of the bottom connections are bridged to the brown wire.
From top left, mirroring your last picture
1 Red /White 2 Brown 3 Red /Orange 4 Red
5 Red /White 6 Brown 7 Red/Orange 8 Red/Yellow
You can have the remains of the loom if its useful. However I've cut some of the connectors off it and used them on the 600.
-
- Settled in member
- Posts: 89
- Joined: Fri May 02, 2008 10:33 am
Re: Clutch not working, rattling sound after valve check
Well if you find them and don't need the rest of the loom I'll take it. Thanks a lot. Cheers!
-
- Settled in member
- Posts: 73
- Joined: Thu Jun 12, 2008 11:09 am
- Bike owned: FZR400RR 600 Hybrid
- Location: Surrey
Re: Clutch not working, rattling sound after valve check
well i actually managed to find the relay today, which is a minor miracle in my garage at the moment. I've also finished with the loom, its pretty much complete apart from the coil and fuel sender plugs have been cut off.
You can have both for the postage costs.
You can have both for the postage costs.
-
- Settled in member
- Posts: 89
- Joined: Fri May 02, 2008 10:33 am
Re: Clutch not working, rattling sound after valve check
Great I'll have them then for sure! Just came back today from Madrid, drove there on thursday morning. Lovely city, wouldn't advise driving there though, total chaos.
-
- Settled in member
- Posts: 43
- Joined: Sun Jun 28, 2009 11:01 am
- Bike owned: 1990 fzr6 3he with a 4jh engin
Re: Clutch not working, rattling sound after valve check
My fuse box has more wires coming from it then the one shown in the picture
Sometimes find that you get a loose wire because of corrsion over the years
Sometimes find that you get a loose wire because of corrsion over the years