Hi,
Where's the best place to get a rocker cover and sump gasket for a 3en1 without buying a full gasket kit?
Want to give it a thorough service, do the valve clearances and clean out the sump.
Cheers,
Rob
Gasket Supplier
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
willandrip
- Site Supporter
- Posts: 983
- Joined: Sun Aug 14, 2011 8:33 am
- Bike owned: Far, far too many now
- Location: North Tyneside Tyne and Wear
Re: Gasket Supplier
Any Yamaha dealer or from E gay.
The 3HE sump gasket is the same.
You can usually re-use the cam cover one.
Cam cover gasket;1WG-11193-00 .
http://www.ebay.co.uk/itm/NOS-YAMAHA-FZ ... 5660725feb
Pattern;http://www.ebay.co.uk/itm/Yamaha-FZR400 ... 232ee45472
Sump;http://www.ebay.co.uk/itm/YAMAHA-FZR400 ... 3383dd33b3
Pattern;http://www.ebay.co.uk/itm/Yamaha-FZR600 ... 2a24dc997b
The 3HE sump gasket is the same.
You can usually re-use the cam cover one.
Cam cover gasket;1WG-11193-00 .
http://www.ebay.co.uk/itm/NOS-YAMAHA-FZ ... 5660725feb
Pattern;http://www.ebay.co.uk/itm/Yamaha-FZR400 ... 232ee45472
Sump;http://www.ebay.co.uk/itm/YAMAHA-FZR400 ... 3383dd33b3
Pattern;http://www.ebay.co.uk/itm/Yamaha-FZR600 ... 2a24dc997b
A red box doth not a Snap On make.
-
gruffalo
- Settled in member
- Posts: 2
- Joined: Wed Mar 19, 2014 10:40 pm
Re: Gasket Supplier
That's brilliant, many thanks. I'd looked on ebay but wasn't sure what were common parts between models. I'll get ordering !