400 3tj1

[chris6409]

Is the rubber thing that protects the swingarm from the chain the same on all the fzr 400s and has anyone got a part number as i need to replace mine

[dobbslc]

I'll check my parts book for you.

[rockTJ]

Its part number 3TJ-22151-00. I am pretty sure it is still available new. Mine cost just over £38 when I got it about a year and a half ago.

If you can get a PDF copy of the parts book (which is available here in the docs section?) it's well worth it as the parts diagrams are very good quality.

Chris

[chris6409]

Thanks for tge part number im wondering if the other fzr 400's have the same part as the part number is the same apart from the 3tj bit

[rockTJ]

They are probably not the same. The first three digits refer to the model of bike the part is intended for, the next refer to the part itself and the rest are for revised numbers, like 00-00 is superceded by 00-01 etc. This is to take into account differences on the same model bike ie 3TJ1 and 3TJ2 or 3TJ6.

I have the parts books for quite a few yammies. All of the std exhaust cans are XXX-14710-00, but they obviously don't fit other bikes!

Chris

[Kayla850]

They are probably not the same.

No, you're right, they're not the same. You need a 3TJ chain rubber to fit a 3TJ swingarm.

They tend not to come up second hand (ie cheap) much, I ended up buying two for the last couple of 3TJs we had. £40 each isn't a massive amount to pull out considering it'll probably last another 20-odd years and twenty thousand miles!

[chris6409]

Will one from a 1wg fit a 3tj

[rockTJ]

NO!!

[chris6409]

Ah well dont suppose anyone has a 2nd hand one