All the FZR400 engines are stamped with 1WG .... you want a silver painted engine, try to get hold of the CDI for it and that will have the model code on it.
Really you want an EXUP engine either 3en1 or 3en2 ... the 2TK would be ok too. The earlier Genesis engine will probably fit (but I don't know for sure), these are painted black.
400 Engines
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
-
eabeukes
- Settled in member
- Posts: 6
- Joined: Wed May 25, 2011 10:30 am
Re: 400 Engines
Evil - thanks
I think from what you say it would rule out the one I'm looking at - 21k miles on it and black makes it sound quite new:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
I think from what you say it would rule out the one I'm looking at - 21k miles on it and black makes it sound quite new:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: 400 Engines
Nope not that one :)
Keep looking something will turn up
Keep looking something will turn up
-
barryfzr
- Site Supporter
- Posts: 144
- Joined: Wed Apr 30, 2008 11:12 pm
Re: 400 Engines
Genesis and 2tk engines are the same size/mounting 