fueling 3tj

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
alfie600
Settled in member
Posts: 15
Joined: Thu Mar 18, 2010 10:55 am

fueling 3tj

Post by alfie600 » Thu Mar 18, 2010 7:36 pm

hi there dous removing exup valve weakon or ritchen mid range my 3tj bobs a bit at 6 thow any ideas cheers alf
Top
Kayla
Settled in member
Posts: 33
Joined: Tue May 06, 2008 11:00 am
Bike owned: '87 FZR400, '96 TRX850

Re: fueling 3tj

Post by Kayla » Thu Mar 18, 2010 8:45 pm

It'll probably make it run a little rich, try dropping the needles a notch :)
Top
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan

Re: fueling 3tj

Post by Evilchicken0 » Thu Mar 18, 2010 9:38 pm

No it will weaken the mixture below 6k rpm. The larger exhaust area flows more gas.
Top
Kayla
Settled in member
Posts: 33
Joined: Tue May 06, 2008 11:00 am
Bike owned: '87 FZR400, '96 TRX850

Re: fueling 3tj

Post by Kayla » Fri Mar 19, 2010 2:03 am

You could try both, it's free! ;)
Top
Post Reply

Return to “Yamaha - Workshop”